Gilliner® 1066 is a general purpose laminate made from fiberglass cloth reinforced polyester resin. Gilliner® 1066 is available with a 1 mil white polyvinyl fluoride film overlay (Gilliner® 1066T) on the face side or with bondable surface panel facings (Gilliner® 1066S). Gilliner® 1066 comes in sheet or roll stock. Request Gilliner®1066R for thicknesses under 0.060 inch (1.52 mm).
該層壓板專為通用飛機貨艙內襯而設計。
| Gilliner® 1066 (表格形式) | Gilliner® 1066 (卷狀) |
|
|---|---|---|
| 厚度，英寸（毫米） | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) 0.070 (1.778) 0.075 (1.905) 0.090 (2.286) 0.125 (3.175) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) |
| 長度，英寸（毫米） | 標準 144 (3,658) 最多 168 (4,267) | 標準 150 英尺 (45,720) 最大 150 英尺 (45,720) |
| 寬度，英寸（毫米） | 標準 48 (1,219) 最多 60 (1,524) | 標準 48 (1,219) 最多 60 (1,524) |
樹脂系統： 聚酯樹脂
加強： 機織玻璃纖維布
| TGC 產品編號 | 不同之處 |
|---|---|
| Gilliner® 1366T | 玻璃纖維/聚酯層壓板具有更高的衝擊強度和抗穿刺性。 |
以下測試按照 DMS 1946 進行。
| TGC產品 | 1066-013 | 1066-016 | 1066-023 | 1066-030 | 1066-045 | 1066-060 | |
|---|---|---|---|---|---|---|---|
| 重量，psf (kg/m2) | 0.12 (0.60) | 0.19 (0.91) | 0.22 (1.05) | 0.30 (1.42) | 0.44 (2.14) | 0.60 (2.80) | |
| 邊緣軸承，ksi (Mpa) | 經 | 28 (193) | 39 (269) | 28 (193) | 30 (207) | 32 (221) | 38 (262) |
| 充滿 | 32 (221) | 34 (234) | 25 (172) | 32 (221) | 61 (421) | 43 (296) | |
| 螺栓連接強度，lbs (N) | 經 | 258 (1,148) | 169 (752) | 401 (1,784) | 239 (1,063) | 453 (2,015) | 653 (2,905) |
| 充滿 | 240 (1,068) | 179 (796) | 365 (1,624) | 274 (1,219) | 569 (2,531) | 409 (1,819) | |
| 衝擊強度，ft-lbs (Nm) | 6 (8) | 9 (12) | 11 (15) | 17 (23) | 25 (34) | 35 (48) | |
| 吸水率，% | 1.5 | 1.3 | 1.3 | 1.6 | 2.9 | 2.1 | |
| 易燃 | 符合 FAR 25.853 和 855 第 I 部分和 III 部分 | ||||||
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
