Gilpatch® 6006 系統是一種玻璃纖維增強聚酯層壓板，背面塗有壓敏粘合劑。
Gillpatch® 6006 is designed as a patch for repairing holes and tears in cargo compartment liners.
Gillpatch® 6006 is approved for use in Class B and E cargo compartment as defined in FAR 25.857.
| 厚度，英寸（毫米） | 0.026 (0.660) |
| 尺寸，英寸 x 英寸（毫米 x 毫米） | 4.5 x 4.5 (114 x 114)、6 x 6 (152 x 152)、9 x 9 (229 x 229) 和 12 x 12 (305 x 305) |
| 板材，英寸 x 英寸（毫米 x 毫米） | 最大 36 x 72 (914 x 1,829) |
粘合劑： 壓敏膠
樹脂： 聚酯樹脂
加強： 機織玻璃纖維布
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillpatch® III 6306 | 背面帶有粘合劑的玻璃纖維/酚醛層壓板。與 6006 和 1367P 相比，具有卓越的衝擊強度。 |
以下測試按照 ASTM 標準方法進行。
| TGC 部件號 | 60061 | |
|---|---|---|
| 重量，psf (kg/m2) | 0.60 (2.93) | |
| 抗彎強度2, ksi (兆帕) | 18 (124) | |
| 煮沸2小時後 | 12 (83) | |
| 彎曲模量2, 微積分 (Gpa) | 0.8 (5.52) | |
| 煮沸2小時後 | 0.5 (3.4) | |
| 抗拉強度3, ksi (兆帕) | 38 (262) | |
| 煮沸2小時後 | 30 (207) | |
| 拉伸模量3, 微積分 (Gpa) | 0.8 (5.52) | |
| 煮沸2小時後 | 0.5 (3.4) | |
| 抗壓強度4, ksi (兆帕) | 9 (62) | |
| 煮沸2小時後 | 6 (41) | |
| 承載強度5, ksi (兆帕) | 12 (83) | |
| 剪切強度6, ksi (兆帕) | 18 (124) | |
| 樹脂含量，% | 38 | |
| 巴氏硬度7 | 30 | |
| 吸水率8, % | 2.5 | |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(ii) | |
1在背面沒有粘合劑的 0.015 層壓板上進行測試。
2ASTM D790，經向
3ASTM D638，經向
4ASTM D695
5ASTM D953
6ASTM D732
7巴氏硬度是一種沒有單位的相對硬度測量值
8ASTM D570
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
