Gillfab® 4122A/B 是一種輕質、低煙排放的夾芯板，由玻璃纖維增強酚醛面板粘合到間位芳綸蜂窩芯材製成。 1 密耳白色聚氟乙烯薄膜。
多用途面板通常用於飛機內部應用，例如側壁、貨艙、艙壁、廚房和天花板面板。也適用於海軍和其他大型船舶的木工面板。
| 厚度，英寸（毫米） | 0.125 (3.175) 0.200 (5.08) 0.250 (6.35) 0.315 (8.00) 0.344 (8.74) 0.400 (10.16) 0.455 (11.56) 0.500 (12.70) 0.750 (19.05) 0.828 (21.03) 1.0 (25.4) 1.04 (26.42) |
| 飾面，英寸 (mm) | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) 0.030/0.030 (0.762/0.762) |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) |
| 長度，英寸（毫米） | 典型 96 (2,438)，最大 168 (4,267) |
| 核 | Gillcore® HD light-density honeycomb |
粘合劑： 改性酚醛
核： Gillcore® HD honeycomb
飾面加固： 玻纖布
飾面樹脂系統： 酚醛樹脂
可以在正面或兩側添加 1 百萬白色聚氟乙烯薄膜覆蓋層。
Gillfab® 4122A
Gillfab® 4122B
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillfab® 4022 | Similar construction and resin with the exception of epoxy adhesive and medium-density Gillcore® HD honeycomb. 優越的強度和最小的煙霧排放。 |
以下測試是根據 MEP15-017 規範要求運行的。
| TGC 部件號 | 4122A-250 | 4122A-500 | |
|---|---|---|---|
| 面板厚度，英寸 (mm) | 0.250 (6.35) | 0.500 (12.70) | |
| 表皮厚度，英寸 (mm) | 0.010/0.010 (0.254/0.254) | 0.010/0.010 (0.254/0.254) |
|
| 重量，psf (kg/m2) | 0.29 (1.42) | 0.36 (1.76) | |
| 長梁彎曲，磅 (N) | 150 (667) | 153 (681) | |
| 撓度 @ 100 磅，英寸（@ 445N，毫米） | 不適用 | 0.944 (24) | |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 頂部 | 41 (182) | 41 (182) |
| 底部 | 42 (187) | 37 (165) | |
| 易燃 | 符合 FAR 25.853 和 855 App F 第 I 部分 | ||
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
