Gillfab® 1368G series laminates are ultra-light weight, high strength, low FST grade liners constructed using S-glass cloth with a modified phenolic resin system and an optional 1 mil white Polyvinyl Fluoride (PVF) film overlay on the face side for surface reflectivity and uniform appearance. Gillfab®1368G is an alternative to other Gillfab® 1368 series for aircraft cargo liners which maximizes weight savings.
飛機貨艙、艙壁飾面和防噴板的貨艙內襯。
| Gillfab® 1368G 單面PVF薄膜 |
|
| 厚度 英寸（毫米） | 0.007 (0.178) 0.027 (0.686) |
| 長度 | 標準 144 英寸（3,658 毫米） 最大 168 英寸（4,267 毫米） |
| 寬度 | 標準 48 英寸（1,219 毫米） 最大 72 英寸（1,829 毫米） |
| 雙方 | Gillfab® 1368G | 應要求提供 | |
| 顏色 | 面側 | 1百萬白色PVF薄膜 | 琥珀色 花崗岩灰 迷霧米色 |
| 顏色 | 面側 | 琥珀色 | 琥珀色 |
加強： 機織玻璃纖維布
樹脂系統： 酚醛樹脂
表面處理： 適用於標準應用的 1 密耳白色 PVF 薄膜覆蓋層
Gillfab® 1368G
Gillfab® 1368 series are high strength, high impact and fire resistant fiberglass reinforced phenolic laminates for aircraft cargo liner applications.
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillfab® 1368A | 高強度、高衝擊、低 FST、玻璃纖維增強酚醛層壓板，適用於飛機貨運班輪應用。 |
| Gillfab® 1368B | 比1368A更薄、更輕。 |
| Gillfab® 1367C | 1368A 卷狀結構。 |
| Gillfab® 1368E | 1368A，層壓板的兩面均粘合有 1 密耳白色 PVF 薄膜。 |
| Gillfab® 1368G | 極薄、輕量且衝擊強度優於相應類型。 |
| Gillfab® 1367M | 1368B 卷狀結構。 |
| TGC 部件號 | 1368G007 | 1368G027 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.007 (0.18) | 0.026 (0.69) | |
| 重量，psf (kg/m2) | 0.067 (0.33) | 0.247 (1.20) | |
| 衝擊強度1, ft·lbf (N·m) | 13 (18) | 33 (45) | |
| 邊緣軸承2, kpsi (兆帕) | 經 充滿 | 55 (379) 50 (345) | 55 (379) 50 (345) |
| 爬鼓果皮3，磅力/3 英吋寬（牛/76 毫米寬） | 經 充滿 | 不適用 不適用 | 340 (1,510) 300 (1,330) |
| 雙點邊緣軸承2 磅力 (N) | 經 充滿 | 315 (1,400) 300 (1,330) | 不適用 不適用 |
| Overlay Film PeelSup>4 lb/in (N/mm) | 3.0 (0.52) – No PVF Film Separation | 3.0 (0.52) – No PVF Film Separation | |
| 易燃 | 符合 FAR 25.853 和 855 附錄 F 第 I 和 III 部分的要求 | ||
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
