Gillfab® 5071A 和 5072A 是輕質高性能夾芯板，由玻璃纖維布增強酚醛面板粘合到 Gillcore® 間位芳綸蜂窩體製成。
這些面板設計用於飛機機艙內部結構，如廚房、盥洗室、艙壁、隔板、儲藏室和機組人員休息區。
| 5071A | 5072A | |
|---|---|---|
| 厚度，英寸（毫米） | 0.236 – 1.00 (6.00 – 25.4) | 0.120 – 1.00 (3.05 – 25.4) |
| 飾面，正面/背面，英寸（毫米） | 最低限度 0.010/0.010 (0.25/0.25) 標準 0.020/0.020 (0.51/0.51)，增量為 0.010 (0.25) | 標準/最低 0.018/0.018 (0.46/0.46)，增量為 0.018 (0.46) |
| 長度，英寸（毫米） | 標準 96 (2,438)，最大 144 (3,658) | |
| 寬度，英寸（毫米） | 標準 48 (1,219)，最大 60 (1,524) | |
| 蜂窩 | Gillcore® HD with the option of various cell sizes and low/mid densities | |
| 選項 | 可在單面或雙面添加 150 萬黎明灰色間位芳綸 | |
核： Gillcore® meta-aramid
飾面加固： 機織玻璃纖維布
飾面樹脂系統： 酚醛樹脂
以下測試按照 ASTM 標準測試方法進行。
| TGC 部件號 | 5071A500 | 5072A500 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.505 (12.8) | 0.498 (12.6) | |
| 重量，psf (kg/m2) | 0.595 (2.95) | 0.570 (2.78) | |
| 面板剪力1，磅 (N) | 絲帶 | 442 (1,966) | 689 (3,065) |
| 橫 | 224 (996) | 367 (1,632) | |
| 長梁彎曲1, 磅 (N) | 絲帶 | 366 (1,628) | 325 (1,446) |
| 橫 | 220 (979) | 335 (1,490) | |
| 偏轉@100磅1，英寸（445N，毫米） | 絲帶 | 0.45 (11.46) | 0.51 (12.80) |
| 橫 | 0.48 (12.19) | 0.45 (11.46) | |
| 爬鼓果皮2, in-lbs/3″ (N/76mm) | 絲帶，頂部 | 31 (137) | 31 (137) |
| 絲帶，底部 | 32 (142) | 34 (151) | |
| 橫向、頂部 | 28 (125) | 35 (156) | |
| 橫向、底部 | 25 (111) | 34 (151) | |
| 穩定壓縮3, 磅/平方英寸 (兆帕) | 300 (2.07) | 646 (4.45) | |
| 衝擊強度4, 英尺-磅 (Nm) | 51 (69) | 58 (78) | |
| 易燃 | 滿足 FAR 25.853 附錄 F 第 I 部分 (a)(1)(i) |
||
1 – Test in accordance with ASTM D-7249 (previously C-393)
2 – Test in accordance with ASTM D-1781
3 – Test in accordance with ASTM C-365
4 – Test in accordance with ASTM D-5420
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
