Gillfab® 4034 is a lightweight and high performance sandwich panel made from unidirectional carbon fiber reinforced epoxy facings bonded to aluminum core.
The panel is designed for use in aircraft cabin interior structures such as galleys, lavatories, bulkheads, partitions, storage compartments and electronic pocket doors.
| 厚度，英寸（毫米） | 0.125 (3.18) 0.250 (6.35) 0.375 (9.53) 0.500 (12.70) 0.625 (15.88) 0.750 (19.05) |
| 饰面厚度，正面/背面，英寸 (mm) | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) |
| 宽度，英寸（毫米） | 典型 48 (1,219)，最大 60 (1,524) |
| 长度，英寸（毫米） | 典型 96 (2,438)，最大 144 (3,658) |
粘合剂： 环氧薄膜
核： 铝5052
饰面加固： 带玻璃布覆盖层和底层的单向碳纤维
饰面树脂系统： 环氧树脂
以下测试按照 Dassault Dwg 运行。 7700262。
| TGC 零件号 | 4034-500 | |
|---|---|---|
| 重量，psf (kg/m2) | 0.385 (1.88)* | |
| 长梁弯曲，磅 (N) 503 (2,237) | ||
| 挠度 @ 100 磅，英寸（@ 445N，毫米） | 0.234 (5.94) | |
| 面板剪切力，磅 (N) | 大号 W | 240 (1,068) 139 (618) |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 脸 后退 | 32 (142) 31 (138) |
| 稳定压缩，psi（N/mm2) | 336 (2.32) | |
| 翘曲度，英寸/英尺（毫米/米） | 0.04 (1.02) | |
| 易燃 | 了解 FAR 25.853 应用程序 F 第 I 部分 | |
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
