Gillfab® 4405A 是一种夹层板，由玻璃纤维环氧增强饰面层压板粘合到 Gillcore® HD 间位芳纶蜂窝芯上。Gillfab® 4405B 与 4405A 完全相同，只是底部饰面粘合了一层铝箔。
适用于空中客车工业 A300/A300-600/A310 飞机的乘客舱、驾驶舱和货舱的地板面板。当存在更严格的可燃性要求时，4405B 设计为底部贴有铝箔。
| 厚度，英寸（毫米） | 0.375 (9.5) |
| 长度和宽度，英寸（毫米） | 最大 60 x 144（1,524 x 3,658） |
| 饰面厚度，正面/背面，英寸 (mm) | A 型 0.030/0.024 (0.762/0.610) B 型 0.030/0.025 (0.762/0.635) |
粘合剂： 环氧树脂
核： 间位芳纶
饰面加固： 玻璃纤维编织布
饰面树脂系统： 环氧树脂
以下测试是根据 A1 5360 MIM000600 规范要求运行的。
| TGC 部件号 | 4405-375 |
|---|---|
| 重量，psf (kg/m2) | 0.785 (3.83) |
| 翘曲度，英寸/英尺（毫米/米） | 0 (0) |
| 长梁弯曲，磅 (N) | 454 (2,027) |
| Drum Peel, in-lbs/3″ width (N/76 mm width) | 69 (310) |
| 易燃 | 满足 FAR 25.853 附录 F 第 I 部分 (a)(1)(i) 和 (a)(2)(ii) 的要求 |
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
