Gillfab® 1137 是一种轻质、灵活的衬里,由尼龙布增强尼龙和环氧树脂制成。
该衬里设计用于支撑和保护某些军用飞机中的非自密封燃料电池。
厚度,英寸(毫米) | 0.030 (0.762) 和 0.045 (1.143) |
长度,英寸(毫米) | 典型 78 (1,981),最大 160 (4,064) |
宽度,英寸(毫米) | 典型 16 (406),最多 60 (1,524) |
颜色 | 自然的 |
树脂: 尼龙环氧树脂
加强: 尼龙布
表面: 光滑
以下测试按照BMS 8-13规范要求进行。
TGC 部件号 | 1137-045 | |
---|---|---|
重量,psf (kg/m2) | 0.28 (1.37) | |
抗拉强度 | 翘曲方向,psi (mpa) 填充方向,psi (mpa) | 1,282 (8.84) 1,196 (8.25) |
拉伸伸长率 | 扭曲方向,% 填充方向,% | 30 30 |
尺寸稳定性 | 扭曲方向 填充方向 | 认识 BMS 8-13 |
易燃 | 扭曲方向 填充方向 | 了解 FAR 25.855 应用程序 F 第 I 部分 |
当遵循推荐的预防措施时,本产品可以安全使用和应用。使用本产品前,请阅读并理解 安全数据表 (SDS),其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到: www.thegillcorp.com.如需销售和订购信息,请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.