Gillfab® 4009 是一种轻质、高强度的夹层板，采用单向碳纤维增强环氧饰面与 Gillcore® HD 间位芳纶蜂窝粘合而成。
该面板设计用作飞机中的中型结构面板，其中轻质和刚性是主要考虑因素，例如座椅下、厨房、地板和舱壁。
| 厚度，英寸（毫米） | 0.400 (10) |
| 长度和宽度，英寸（毫米） | 典型尺寸 48 x 120 (1,219 x 3,048) 最大 65 x 144 (1,651 x 3,658) |
| 饰面厚度，正面/背面，英寸，（毫米） | 典型值 0.010/0.010 (0.254/0.254)，也可提供 0.015/0.015 (0.381/0.381)、0.020/0.020 (0.508/0.508) 和 0.035/0.035 (0.890/0.890) |
粘合剂： 环氧树脂
核： 间位芳纶
饰面加固： 单向碳纤维
饰面树脂系统： 环氧树脂
The following tests are run in accordance with Embraer MEP 15-030, based on based on Gillfab® 4009 with 0.010″/0.010″(0.254 mm/0.254 mm) facings.
| TGC 部件号 | 4009-400 |
|---|---|
| 重量，psf (kg/m2) | 0.39 (1.90) |
| Climbing Drum Peel, Face/Bottom, in-lbs/3″ width (N/76mm width) | 41/41 (182/182) |
| 长梁弯曲强度，L 方向，磅力 (N) 挠度 @ 100 磅，英寸（@445N，毫米） 面对压力，ksi (Mpa) | 282 (1,253) 0.412 (10.5) 59 (410) |
| 长梁弯曲强度，W 方向，磅力 (N) 挠度 @ 100 磅，英寸（@445N，毫米） 面对压力，ksi (Mpa) | 272 (1,212) 0.398 (10.1) 58 (399) |
| 短梁弯曲强度，L 方向，lbf (N) 核心剪切应力，psi (Mpa) | 580 (2,581) 245 (1.69) |
| 短梁弯曲强度，W 方向，磅力 (N) 核心剪切应力，psi (Mpa) | 325 (1,443) 138 (0.95) |
| 平面压缩，psi (Mpa) | 625 (4.31) |
| 易燃 | 满足 FAR 25.853 的要求 附录 F 第 I 部分 |
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
