Gillfab® 5071A 和 5072A 是重量轻、高性能的夹层板，由粘合到 Gillcore® 间位芳纶蜂窝的玻璃纤维布增强酚醛饰面制成。
这些面板设计用于飞机机舱内部结构，例如厨房、厕所、舱壁、隔板、储藏室和机组人员休息区。
| 5071A | 5072A | |
|---|---|---|
| 厚度，英寸（毫米） | 0.236 – 1.00 (6.00 – 25.4) | 0.120 – 1.00 (3.05 – 25.4) |
| 饰面，正面/背面，英寸（毫米） | 最低限度 0.010/0.010 (0.25/0.25) 标准 0.020/0.020 (0.51/0.51)，增量为 0.010 (0.25) | 标准/最低 0.018/0.018 (0.46/0.46)，增量为 0.018 (0.46) |
| 长度，英寸（毫米） | 标准 96 (2,438)，最大 144 (3,658) | |
| 宽度，英寸（毫米） | 标准 48 (1,219)，最多 60 (1,524) | |
| 蜂窝 | Gillcore® HD with the option of various cell sizes and low/mid densities | |
| 选项 | 单面或双面可添加 150 万黎明灰间位芳纶 | |
核： Gillcore® meta-aramid
饰面加固： 机织玻璃纤维布
饰面树脂系统： 酚醛树脂
以下测试是根据 ASTM 标准测试方法进行的。
| TGC 部件号 | 5071A500 | 5072A500 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.505 (12.8) | 0.498 (12.6) | |
| 重量，psf (kg/m2) | 0.595 (2.95) | 0.570 (2.78) | |
| 面板剪切力 1, lbs (N) | 丝带 | 442 (1,966) | 689 (3,065) |
| 横 | 224 (996) | 367 (1,632) | |
| 长梁弯曲1, 磅 (N) | 丝带 | 366 (1,628) | 325 (1,446) |
| 横 | 220 (979) | 335 (1,490) | |
| 挠度 @ 100 磅1, 英寸 (445N, 毫米) | 丝带 | 0.45 (11.46) | 0.51 (12.80) |
| 横 | 0.48 (12.19) | 0.45 (11.46) | |
| 爬鼓果皮2, in-lbs/3″ (N/76mm) | 丝带，顶部 | 31 (137) | 31 (137) |
| 丝带，底部 | 32 (142) | 34 (151) | |
| 横向，顶部 | 28 (125) | 35 (156) | |
| 横向，底部 | 25 (111) | 34 (151) | |
| 稳定压缩3, 磅/平方英寸 (兆帕) | 300 (2.07) | 646 (4.45) | |
| 冲击强度4, 英尺-磅 (Nm) | 51 (69) | 58 (78) | |
| 易燃 | 符合 FAR 25.853 附录 F 第一部分 (a)(1)(i) |
||
1 – Test in accordance with ASTM D-7249 (previously C-393)
2 – Test in accordance with ASTM D-1781
3 – Test in accordance with ASTM C-365
4 – Test in accordance with ASTM D-5420
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
