GillBOND™ A197 and A193 are 300°F (149°C) curing epoxy film adhesives formulated with flame retardant properties. Suitable for use in commercial and defense aerospace applications.
• Aerospace grade film adhesive
• Composite to composite bonding
• Composite to metal bonding
• Metal to metal bonding
| GillBOND™ Film Adhesive | A197 | A193 |
| 标称重量，psf (gsm) | 0.030 (147) | 0.060 (294) |
| 颜色 | 浅绿色 | 蓝色的 |
| 宽度，英寸（毫米） | 49 (125) | |
| 卷长度，码（米） | 10, 50 (9, 46) | |
| 载体 | 尼龙稀松布 | |
粘合剂： 带尼龙稀松布载体的环氧树脂薄膜
Curing is recommended at 300°F (149°C), at least 15 psi (103 kPa), and cure time between 30-90 minutes.
典型固化周期：
Cure cycle of 300°F (149°C) for 90 minutes is used to generate Performance Properties
| 美国材料试验协会 | 财产 | Test Temperature °F (°C) | A197 0.03 每平方英尺（146 克每平方米） | A193 0.06 psf (294 gm) | 基质 |
| D1002 | 搭接剪切力 psi (MPa) | -67 (-55) | 3,475 (23.9) | 3,534 (24.4) | 0.063″ 2024-T3 AI, 1″ x 7″ with 1″ overlap |
| 75 (24) | 3,483 (24.0) | 3,527 (24.3) | |||
| 180 (82) | 2,798 (19.3) | 3,104 (21.4) | |||
| D1781 | 金属对金属 CD 剥离 英寸磅/英寸宽度 (N/25mm-宽度) | -67 (-55) | 49 (218) | 55 (245) | 0.020″ and 0.063″ 2024-T3 AI, 3″ x 12″ |
| 75 (24) | 58 (259) | 63 (281) | |||
| 180 (82) | 68 (303) | 74 (330) | |||
| D1781 | 蜂窝三明治 CD 剥离 英寸磅/3 英寸宽 (N/76mm-宽度) | -67 (-55) | 27 (240.3) | 54 (480.6) | Skin: 0.020″ 2024-T3 AI Core: 2.2 MIL, 1/8″, 8.5#, 5052, 3″ x 12″ |
| 75 (24) | 38 (338.2) | 69 (614.1) | |||
| 180 (82) | 36 (320.4) | 70 (623.0) | |||
| C297 | 平向拉伸 psi (MPa) | -67 (-55) | 1,370 (9.4) | 1,802 (12.4) | Skin: 0.020″ 2024-T3 AI Core: 2.2 MIL, 1/8″, 8.5#, 5052, 2″ x 2″ |
| 75 (24) | 1,116 (7.7) | 1,572 (10.8) | |||
| 180 (82) | 830 (5.7) | 1,135 (7.8) |
所示数字反映了典型值，不应用作设计规范。
保质期是从生产之日起，根据下面列出的储存温度计算。工作寿命定义了超出储存温度的时间。
| 储存情况 | A197 和 A193 |
| Shelf Life at 0°F (-18°C) | 2年 |
| Shelf Life at 40°F (4°C) | 6个月 |
| Working Life at 75°F (24°C) | 15天 |
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
