Gillfab® 5040 是一种商业级夹芯板，由粘合到端纹轻木芯材的铝合金饰面制成。
该面板用于商用飞机的地板、厨房面板、货物集装箱和舱壁。
| 厚度英寸（毫米） | 0.125 (3.175) 0.250 (6.35) 0.280 (7.112) 0.320 (8.128) 0.325 (8.225) 0.375 (9.525) 0.400 (10.16) 0.410 (10.414) 0.437 (11.100) 0.500 (12.7) | 0.535 (13.589) 0.580 (14.732) 0.610 (15.50) 0.625 (15.875) 0.673 (17.09) 0.750 (19.05) 1.00 (25.4) 1.50 (38.1) 3.125 (79.375) |
| 蒙皮厚度，英寸（毫米） | 0.011/0.011 (0.280/0.280) 0.016/0.011 (0.406/0.280) 0.020/0.011 (0.508/0.280) 0.020/0.016 (0.508/0.406) 0.020/0.020 (0.508/0.508) 0.020/0.032 (0.508/0.813) 0.025/0.020 (0.635/0.508) 0.025/0.025 (0.635/0.635) 0.032/0.016 (0.813/0.406) | 0.032/0.020 (0.813/0.508) 0.032/0.032 (0.813/0.813) 0.040/0.020 (1.016/0.508) 0.040/0.025 (1.016/0.635) 0.040/0.040 (1.016/1.016) 0.063/0.063 (1.60/1.60) 0.080/0.080 (2.032/2.032) 0.100/0.100 (2.54/2.54) |
| 宽度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) | |
| 长度，英寸（毫米） | 典型 144 (3,658)，最大 144 (3,658) | |
粘合剂： 弹性体粘合剂
核： 端纹轻木
饰面： 2024-T3、7075-T6 或 6061-T6 铝
| TGC 产品编号 | 不同之处 |
|---|---|
| Gillfab® 5007 | 与玻璃纤维饰面类似的结构。 |
| Gillfab® 5041 | 与轻密度轻木芯材类似的结构。 |
| Gillfab® 5042 | 类似的结构，附加了环氧薄膜粘合剂选项，用于将饰面粘合到芯材上。 |
| Gillfab® 5242 | 类似的结构，只是在半装饰性飞机内表面添加了玻璃纤维饰面。 |
The following tests are run in accordance with MEP 02-011, and tests were done on 5040 with 0.020″/0.011″ 2024-T3 aluminum alloy facings.
| TGC 部件号 | 5040-280 | 5040-400 |
|---|---|---|
| 厚度，英寸（毫米） | 0.280 (7.11) | 0.400 (10.16) |
| 重量，psf (kg/m2) | 0.717 (3.50) | 0.786 (3.838) |
| 长梁弯曲，磅 (N) | 214 (952) | 331 (1,472) |
| 挠度 @ 100 磅，英寸（@ 445N，毫米） | 0.682 (17.32) | 0.310 (7.87) |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 80 (356) | 128 (569) |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | |
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
