Gillfab® 1368B series laminates are high strength, low FST grade liners constructed using woven S-glass cloth with a modified phenolic resin system and an optional 1 mil white Polyvinyl Fluoride (PVF) film overlay on the face and/or back side for surface reflectivity and uniform appearance
Cargo liners for cargo compartment, bulkhead facings and blowout panels for aircraft. Also used as backing material for non-textile floor mats used in wet areas of cabin interior (without PVF film overlay). Suitable for passenger-to-freighter conversions.
| Gillfab® 1368B 单面PVF薄膜 |
|
|---|---|
| 厚度英寸（毫米） | 0.011 (0.280) 0.018 (0.460) 0.026 (0.660) 0.035 (0.889) 0.045 (1.140) |
| 长度 | 标准 144 英寸（3,658 毫米） 最大 168 英寸（4,267 毫米） |
| 宽度 | 标准 48 英寸（1,219 毫米） 最大 72 英寸（1,829 毫米） |
| 双方 | 标准 | 应要求提供 | |
|---|---|---|---|
| 颜色 | 面侧 | 1百万白色PVF薄膜 | 琥珀色 花岗岩灰 迷雾米色 |
| 颜色 | 背面 | 琥珀色 | 琥珀色 |
加强： 机织玻璃纤维布
树脂系统： 酚醛树脂
表面处理： 适用于标准应用的 1 密耳白色 PVF 薄膜覆盖层
Gillfab® 1368B
Gillfab® 1368 series are high strength, high impact and fire resistant fiberglass reinforced phenolic laminates for aircraft cargo liner applications.
| TGC 产品编号 | 不同之处 |
|---|---|
| Gillfab® 1368A | 高强度、高冲击、低 FST、玻璃纤维增强酚醛层压板，适用于飞机货运班轮应用。 |
| Gillfab® 1368B | 比1368A更薄、更轻。 |
| Gillfab® 1367C | 1368A 卷状结构。 |
| Gillfab® 1368E | 1368A，层压板的两面均粘合有 1 密耳白色 PVF 薄膜。 |
| Gillfab® 1368G | 极薄、轻量且冲击强度优于相应类型。 |
| Gillfab® 1367M | 1368B 卷状结构。 |
| TGC 部件号 | 1368B011 | 1368B018 | 1368B026 | 1368B035 | 1368B045 | |
|---|---|---|---|---|---|---|
| 厚度，英寸（毫米） | 0.011 (0.28) | 0.018 (0.46) | 0.026 (0.66) | 0.033 (0.84) | 0.045 (1.14) | |
| Weight, psf (kg/m²) | 0.10 (0.49) | 0.16 (0.76) | 0.24 (1.15) | 0.30 (1.46) | 0.44 (2.17) | |
| Impact Strength¹, ft·lbf (N·m) | 11 (15) | 20 (27) | 23 (31) | 27 (37) | 30 (41) | |
| Edge Bearing², kpsi (mpa) | 经 | 39 (269) |
||||
| 充满 | 46 (317) | |||||
| Climbing Drum Peel³, lbf/3 inch width (N/76 mm width) | 经 | 40 (178) | ||||
| 充满 | 54 (240) | |||||
| Double Point Edge Bearing²lbf (N) | 经 | 345 (1530) | 不适用 | |||
| 充满 | 338 (1500) | 不适用 | ||||
| Overlay Film Peel⁴ lb/in (N/mm) | 2.5 (0.44) – No PVF Film Separation | |||||
| 易燃 | 符合 FAR 25.853 和 855 附录 F 第 I 部分和第 III 部分的要求 | |||||
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
