Gillfab® 4037 是一种夹芯板，由玻璃纤维布增强环氧树脂层压板和 Dura-Core® II 铝蜂窝芯材制成。
该面板设计用于商务飞机的非结构内饰。
| 厚度，英寸（毫米） | 0.270 (6.86) 0.280 (7.11) 0.390 (9.91) 0.410 (10.41) 0.520 (13.21) 0.530 (13.46) |
| 正面，正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) |
| 长度，英寸（毫米） | 典型 96 (2,438)，最大 144 (3,658) |
| 宽度，英寸（毫米） | 典型 48 (1,219)，最大 68 (1,727) |
粘合剂： 改性环氧树脂
核： Dura-Core® II aluminum honeycomb
饰面加固： 7581玻纤布
饰面树脂系统： 环氧树脂
以下值是 4037 面板的典型值，不应用作设计值。
| TGC 部件号 | 4037 I型 | 4037 II型 | 4037 三型 | |
|---|---|---|---|---|
| 厚度，英寸（毫米） | 0.270 (6.86) | 0.390 (9.91) | 0.520 (13.21) | |
| 标称饰面厚度1, 英寸 (毫米) | 0.010/0.010 (0.254/0.254) | |||
| 单位面积重量，PSF (kg/m2) | 0.29 (1.42) | 0.32 (1.56) | 0.35 (1.71) | |
| 长梁弯曲2 极限载荷，lbf (N) | 丝带 | 215 (955) | 130 (595) | 195 (885) |
| 横 | 190 (855) | 115 (525) | 190 (845) | |
| 面板剪切3 极限载荷，lbf (N) | 丝带 | 345 (1540) | 380 (1705) | 525 (2340) |
| 横 | 230 (1040) | 300 (1330) | 370 (1655) | |
| 爬鼓果皮4 扭矩，英寸-磅/3 英寸宽度（牛米/76 毫米宽度） | 丝带 | 50 (5.65) | ||
| 横 | 60 (6.75) | |||
| 易燃 | 符合 FAR 25.853 应用程序。 F 第一部分 (a)(1)(i) | |||
1 每个饰面包括两层 7581 玻璃纤维布。可根据要求提供不同的饰面厚度。
2 Long Beam Bending was tested per ASTM D7249 using 4-point bending configuration. For Type I, 12″ length specimens were tested
using 5″ loading span and 10″ support span. For Types II and III, 24″ length specimens were tested using 10″ loading span and
20″ support span.
3 Panel Shear was tested per ASTM C393 using 3-point bending configuration. For Type I, 5″ length specimens were tested using
3″ support span. For Types II and III, 6″ in length specimens were tested using 4″ support span.
4 根据 ASTM D1781 测试了 Climbing Drum Peel。
| TGC 部件号 | 4037 IV型 | 4037 V型 | 4037 六型 | |
|---|---|---|---|---|
| 厚度，英寸（毫米） | 0.280 (7.11) | 0.410 (10.41) | 0.530 (13.46) | |
| 标称饰面厚度1, 英寸 (毫米) | 0.020/0.020 (0.508/0.508) | |||
| 单位面积重量，PSF (kg/m2) | 0.49 (2.39) | 0.52 (2.54) | 0.55 (2.69) | |
| 长梁弯曲2 极限载荷，lbf (N) | 丝带 | 410 (1820) | 300 (1330) | 425 (1900) |
| 横 | 250 (1110) | 275 (1225) | 380 (1690) | |
| 面板剪切3 极限载荷，lbf (N) | 丝带 | 475 (2120) | 550 (2445) | 720 (3220) |
| 横 | 275 (1225) | 300 (1330) | 400 (1775) | |
| 爬鼓果皮4 扭矩，英寸-磅/3 英寸宽度（牛米/76 毫米宽度） | 丝带 | 20 (2.25) | ||
| 横 | 30 (3.35) | |||
| 易燃 | 符合 FAR 25.853 应用程序。 F 第一部分 (a)(1)(i) | |||
1 每个饰面包括两层 7581 玻璃纤维布。可根据要求提供不同的饰面厚度。
2 Long Beam Bending was tested per ASTM D7249 using 4-point bending configuration. For Type IV, 12″ length specimens were tested
using 5″ loading span and 10″ support span. For Types V and VI, 24″ length specimens were tested using 10″ loading span and
20″ support span.
3 Panel Shear was tested per ASTM C393 using 3-point bending configuration. For Type IV, 5″ length specimens were tested using
3″ support span. For Types V and VI, 6″ in length specimens were tested using 4″ support span.
4 根据 ASTM D1781 测试了 Climbing Drum Peel。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
