Gillfab® 4123 是一种低烟夹层板，由编织玻璃纤维布增强酚醛饰面粘合 Gillcore® HD 蜂窝芯制成。
该面板设计用作空客工业 A321/A330/A340/A300/A310/A300-600 飞机货舱和货机主甲板的地板面板。
| 厚度，英寸（毫米） | 0.374 (9.5) |
| 长度和宽度，英寸（毫米） | 典型 48 x 144 (1,219 x 3,658) 最大 60 x 144（1,524 x 3,658） |
| 正面，正面/背面，英寸（毫米） | 0.030/0.020 (0.762/0.508) |
粘合剂： 环氧树脂
核： 间位芳纶
饰面加固： 编织玻璃布
饰面树脂系统： 酚醛树脂
以下测试根据 5360 M1M 000500 运行。
| TGC 部件号 | 4123-374 |
|---|---|
| 重量，psf (kg/m2) | 0.78 (3.80) |
| 翘曲度，英寸/英尺（毫米/米） | 0 (0) |
| 长光束弯曲，磅 (N)：带状 (L) 方向 | 504 (2,242) |
| 长梁弯曲，磅 (N)：横向 (W) 方向 | 464 (2,062) |
| 挠度 @ 100 lbs, inch (@445N, mm)：色带 (L) 方向 | 0.55 (13.84) |
| 挠度 @ 100 lbs, inch (@445N, mm)：横向 (W) 方向 | 0.56 (14.09) |
| 面板剪切力，磅 (N) | 964 (4,288) |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 73 (323) |
| 稳定的核心压缩，psi (N/mm2) | 1,821 (12.55) |
| 冲击强度，ft-lbs (Nm) | 8.45 (11.46) |
| 平面内剪切，lbs/in (N/mm) | 782 (137) |
| 插入剪切力，磅 (N) | 1,921 (8,546) |
| 压痕，磅 (N) | 450 (2,002) |
| 易燃 | 符合 FAR 25.853 和 855 App F 第 I 部分和第 III 部分 |
| Food Roller Cart, cycles (lbs/wheel – kgs/wheel) | No depression at 120k (126 – 57) No depression at 35k (165 – 75) |
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
