DURA-CORE® II 5052 鋁蜂窩為航空航天和商業市場提供了解決輕質結構設計挑戰的高度靈活性。
在粘合之前，使用專有的化學轉化塗層清潔和處理箔片。由此產生的蜂窩在惡劣環境中表現出優異的耐腐蝕性，尤其是在鹽霧中。在鹽霧中 30 天后的典型重量損失（使用 ASTM B-117）為 15 mg/ft2 （161.4 毫克/米2），而 AMS-C-7438 允許高達 125 mg/ft2 (1345.0 毫克/米2).
我們生產範圍廣泛的電池尺寸和密度，確保為您的應用提供正確的產品。結合我們定制製造特定芯類型的能力，再加上我們的特殊加工能力，我們可以向您運送您需要的任何形狀、尺寸、密度或輪廓的嵌入式芯細節。
For lightweight applications requiring excellent mechanical strength and excellent corrosion resistance at a good value, DURA-CORE® II 5052 is the best all-around structural core material.
| 標準 | 最大限度 | 寬容 | ||||
|---|---|---|---|---|---|---|
| 英寸 | 毫米 | 英寸 | 毫米 | 英寸 | 毫米 | |
| 絲帶（大） | 48 | 1219 | 100 | 2540 | +2.0 / -0.0 | +50.8 / -0.0 |
| 橫向 (W) | 96 | 2438 | 144 | 3658 | +4.0 / -0.0 | +101.6 / -0.0 |
| 厚度 (T) | 35 | 889 | ||||
| 高達 4 英寸（102 毫米）T | ±0.005 | ±0.127 | ||||
| 超過 4 英寸（102 毫米）T | ±0.062 | ±1.575 | ||||
| 密度 | 見機械特性表 | ±10% | ||||
| 像元大小 | 見機械特性表 | ±10% | ||||
基質： 5052鋁
塗層： 硬膜塗層
When ordering, please specify DURA-CORE® II 5052 using the following format:
Example: DUR – 5052 – 3.1 – 3/16 – N – E, where
| 產品 | 合金 | 密度 | 像元大小 | 穿孔或非穿孔 | 擴展或未擴展 |
|---|---|---|---|---|---|
| 持續時間 | 5052 | 3.1 | 3/16 | A片 | E或U |
| Mechanical Characteristics (Typical Values – US units) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 穩定抗壓強度 | 壓碎強度 | 剪切強度 | 剪切模量 | ||||||
| 磅/英尺3 – inches – inches | 壓力 | 壓力 | 壓力 | ksi | |||||
| 大號 | W | 大號 | W | ||||||
| 75° F | 350° F | 75° F | 75° F | 350° F | 75° F | 350° F | 75° F | ||
| 3.1 – 1/8 – .0007 | 305 | 200 | 145 | 215 | 145 | 132 | 90 | 32 | 16 |
| 4.5 – 1/8 – .0010 | 580 | 380 | 270 | 345 | 240 | 225 | 150 | 51 | 25 |
| 6.1 – 1/8 – .0015 | 1030 | 660 | 450 | 565 | 400 | 345 | 220 | 77 | 37 |
| 8.1 – 1/8 – .0020 | 1575 | 1075 | 760 | 810 | 575 | 540 | 310 | 112 | 50 |
| 10.0 – 1/8 – .0025 | 1875 | 1300 | 1070 | 1075 | 810 | 610 | 415 | 140 | 60 |
| 12.0 – 1/8 – .0030 | 2920 | 1550 | 1400 | 1955* | 1300* | 950* | 440 | 160 | 75 |
| 2.6 – 5/32 – .0007 | 245 | 150 | 105 | 170 | 110 | 102 | 80 | 24 | 12 |
| 3.8 – 5/32 – .0010 | 415 | 280 | 210 | 275 | 200 | 168 | 140 | 41 | 20 |
| 2.0 – 3/16 – .0007 | 180 | 100 | 70 | 122 | 80 | 71 | 65 | 17 | 9 |
| 3.1 – 3/16 – .0010 | 340 | 200 | 145 | 215 | 145 | 128 | 90 | 32 | 16 |
| 4.4 – 3/16 – .0015 | 555 | 375 | 270 | 335 | 235 | 220 | 145 | 50 | 24 |
| 5.7 – 3/16 – .0020 | 870 | 600 | 410 | 465 | 380 | 305 | 200 | 70 | 34 |
| 6.9 – 3/16 – .0025 | 1185 | 780 | 570 | 600 | 500 | 380 | 275 | 91 | 42 |
| 8.1 – 3/16 – .0030 | 1735 | 1075 | 760 | 735 | 575 | 490 | 310 | 112 | 50 |
| 2.3 – 1/4 – .0010 | 215 | 125 | 85 | 145 | 90 | 88 | 70 | 21 | 11 |
| 3.4 – 1/4 – .0015 | 375 | 235 | 160 | 235 | 160 | 145 | 100 | 35 | 18 |
| 4.3 – 1/4 – .0020 | 545 | 365 | 250 | 325 | 235 | 205 | 140 | 48 | 24 |
| 5.2 – 1/4 – .0025 | 770 | 500 | 330 | 415 | 330 | 270 | 160 | 62 | 31 |
| 6.0 – 1/4 – .0030 | 1110 | 650 | 430 | 535 | 390 | 350 | 210 | 75 | 36 |
| 7.9 – 1/4 – .0040 | 1505 | 1025 | 720 | 710 | 550 | 450 | 300 | 108 | 49 |
| 1.6 – 3/8 – .0010 | 98 | 70 | 50 | 88 | 60 | 51 | 35 | 13 | 6 |
| 2.3 – 3/8 – .0015 | 205 | 125 | 85 | 145 | 90 | 88 | 70 | 21 | 11 |
| 3.0 – 3/8 – .0020 | 315 | 190 | 135 | 205 | 140 | 128 | 85 | 30 | 15 |
| 3.7 – 3/8 – .0025 | 415 | 265 | 200 | 255 | 190 | 165 | 105 | 40 | 20 |
| 4.2 – 3/8 – .0030 | 565 | 340 | 240 | 315 | 230 | 205 | 130 | 47 | 23 |
| 5.4 – 3/8 – .0040 | 810 | 540 | 360 | 435 | 355 | 285 | 180 | 66 | 32 |
| 6.5 – 3/8 – .0050 | 1015 | 750 | 510 | 555 | 440 | 360 | 265 | 83 | 40 |
| 4.0 – 1/2 – .0040 | 400 | 320 | 220 | 290 | 220 | 170 | 120 | 44 | 22 |
有關最小值，請參閱 AMS-C-7438。 *梁剪
| Mechanical Characteristics (Typical Values – SI/metric units) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 穩定抗壓強度 | 壓碎強度 | 剪切強度 | 剪切模量 | ||||||
| 磅/英尺3 – inches – inches | 兆帕 | 兆帕 | 兆帕 | 兆帕 | |||||
| 大號 | W | 大號 | W | ||||||
| 23° C | 177° C | 23° C | 23° C | 177° C | 23° C | 177° C | 23° C | ||
| 3.1 – 1/8 – .0007 | 2.10 | 1.38 | 1.00 | 1.48 | 1.00 | 0.91 | 0.62 | 221 | 110 |
| 4.5 – 1/8 – .0010 | 4.00 | 2.62 | 1.86 | 2.38 | 1.65 | 1.55 | 1.03 | 352 | 172 |
| 6.1 – 1/8 – .0015 | 7.10 | 4.55 | 3.10 | 3.90 | 2.76 | 2.38 | 1.52 | 531 | 255 |
| 8.1 – 1/8 – .0020 | 10.86 | 7.41 | 5.24 | 5.58 | 3.96 | 3.72 | 2.14 | 772 | 345 |
| 10.0 – 1/8 – .0025 | 12.93 | 8.96 | 7.38 | 7.41 | 5.58 | 4.21 | 2.86 | 965 | 414 |
| 12.0 – 1/8 – .0030 | 20.13 | 10.69 | 9.65 | 13.48* | 8.96* | 6.55* | 3.03* | 1103 | 517 |
| 2.6 – 5/32 – .0007 | 1.69 | 1.03 | 0.72 | 1.17 | 0.76 | 0.70 | 0.55 | 165 | 83 |
| 3.8 – 5/32 – .0010 | 2.86 | 1.93 | 1.45 | 1.90 | 1.38 | 1.16 | 0.97 | 283 | 138 |
| 2.0 – 3/16 – .0007 | 1.24 | 0.69 | 0.48 | 0.84 | 0.55 | 0.49 | 0.45 | 117 | 62 |
| 3.1 – 3/16 – .0010 | 2.34 | 1.38 | 1.00 | 1.48 | 1.00 | 0.88 | 0.62 | 221 | 110 |
| 4.4 – 3/16 – .0015 | 3.83 | 2.59 | 1.86 | 2.31 | 1.62 | 1.52 | 1.00 | 345 | 165 |
| 5.7 – 3/16 – .0020 | 6.00 | 4.14 | 2.83 | 3.21 | 2.62 | 2.10 | 1.38 | 483 | 234 |
| 6.9 – 3/16 – .0025 | 8.17 | 5.38 | 3.93 | 4.14 | 3.45 | 2.62 | 1.90 | 627 | 290 |
| 8.1 – 3/16 – .0030 | 11.96 | 7.41 | 5.24 | 5.07 | 3.96 | 3.38 | 2.14 | 772 | 345 |
| 2.3 – 1/4 – .0010 | 1.48 | 0.86 | 0.59 | 1.00 | 0.62 | 0.61 | 0.48 | 145 | 76 |
| 3.4 – 1/4 – .0015 | 2.59 | 1.62 | 1.10 | 1.62 | 1.10 | 1.00 | 0.69 | 241 | 124 |
| 4.3 – 1/4 – .0020 | 3.76 | 2.52 | 1.72 | 2.24 | 1.62 | 1.41 | 0.97 | 331 | 165 |
| 5.2 – 1/4 – .0025 | 5.31 | 3.45 | 2.28 | 2.86 | 2.28 | 1.86 | 1.10 | 427 | 214 |
| 6.0 – 1/4 – .0030 | 7.65 | 4.48 | 2.96 | 3.69 | 2.69 | 2.41 | 1.45 | 517 | 248 |
| 7.9 – 1/4 – .0040 | 10.38 | 7.07 | 4.96 | 4.90 | 3.79 | 3.10 | 2.07 | 745 | 338 |
| 1.6 – 3/8 – .0010 | 0.68 | 0.48 | 0.34 | 0.61 | 0.41 | 0.35 | 0.24 | 90 | 41 |
| 2.3 – 3/8 – .0015 | 1.41 | 0.86 | 0.59 | 1.0 | 0.62 | 0.61 | 0.48 | 145 | 76 |
| 3.0 – 3/8 – .0020 | 2.17 | 1.31 | 0.93 | 1.41 | 0.97 | 0.88 | 0.59 | 207 | 103 |
| 3.7 – 3/8 – .0025 | 2.86 | 1.83 | 1.38 | 1.76 | 1.31 | 1.14 | 0.72 | 276 | 138 |
| 4.2 – 3/8 – .0030 | 3.90 | 2.34 | 1.65 | 2.17 | 1.59 | 1.41 | 0.90 | 324 | 159 |
| 5.4 – 3/8 – .0040 | 5.58 | 3.72 | 2.48 | 3.00 | 2.45 | 1.97 | 1.24 | 455 | 221 |
| 6.5 – 3/8 – .0050 | 7.00 | 5.17 | 3.52 | 3.83 | 3.03 | 2.48 | 1.83 | 572 | 276 |
| 4.0 – 1/2 – .0040 | 2.76 | 2.21 | 1.52 | 2.00 | 1.52 | 1.17 | 0.83 | 303 | 152 |
有關最小值，請參閱 AMS-C-7438。 *梁剪
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
