Gillfab® 5040 是一種商業級夾芯板，由黏合到端紋輕木芯材的鋁合金飾面製成。
此面板用於商用飛機的地板、廚房面板、貨物集裝箱和艙壁。
| 厚度英寸（毫米） | 0.125 (3.175) 0.250 (6.35) 0.280 (7.112) 0.320 (8.128) 0.325 (8.225) 0.375 (9.525) 0.400 (10.16) 0.410 (10.414) 0.437 (11.100) 0.500 (12.7) | 0.535 (13.589) 0.580 (14.732) 0.610 (15.50) 0.625 (15.875) 0.673 (17.09) 0.750 (19.05) 1.00 (25.4) 1.50 (38.1) 3.125 (79.375) |
| 蒙皮厚度，英吋（毫米） | 0.011/0.011 (0.280/0.280) 0.016/0.011 (0.406/0.280) 0.020/0.011 (0.508/0.280) 0.020/0.016 (0.508/0.406) 0.020/0.020 (0.508/0.508) 0.020/0.032 (0.508/0.813) 0.025/0.020 (0.635/0.508) 0.025/0.025 (0.635/0.635) 0.032/0.016 (0.813/0.406) | 0.032/0.020 (0.813/0.508) 0.032/0.032 (0.813/0.813) 0.040/0.020 (1.016/0.508) 0.040/0.025 (1.016/0.635) 0.040/0.040 (1.016/1.016) 0.063/0.063 (1.60/1.60) 0.080/0.080 (2.032/2.032) 0.100/0.100 (2.54/2.54) |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) | |
| 長度，英寸（毫米） | 典型 144 (3,658)，最大 144 (3,658) | |
粘合劑： 彈性體黏合劑
核： 端紋輕木
飾面： 2024-T3、7075-T6 或 6061-T6 鋁
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillfab® 5007 | 與玻璃纖維飾面類似的結構。 |
| Gillfab® 5041 | 與輕密度輕木芯材類似的結構。 |
| Gillfab® 5042 | 類似的結構，附加了環氧薄膜黏合劑選項，用於將飾面黏合到芯材上。 |
| Gillfab® 5242 | 類似的結構，只是在半裝飾飛機內表面添加了玻璃纖維飾面。 |
The following tests are run in accordance with MEP 02-011, and tests were done on 5040 with 0.020″/0.011″ 2024-T3 aluminum alloy facings.
| TGC 部件號 | 5040-280 | 5040-400 |
|---|---|---|
| 厚度，英寸（毫米） | 0.280 (7.11) | 0.400 (10.16) |
| 重量，psf (kg/m2) | 0.717 (3.50) | 0.786 (3.838) |
| 長梁彎曲，磅 (N) | 214 (952) | 331 (1,472) |
| 撓度 @ 100 磅，英寸（@ 445N，毫米） | 0.682 (17.32) | 0.310 (7.87) |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 80 (356) | 128 (569) |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | |
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
