Gilliner® 1076C 是通用級襯裡,由無鹼玻璃布和聚酯樹脂系統製成。本產品具有良好的機械強度,適用於商用飛機的貨艙區域、艙壁飾面和防噴板。
飛機貨艙、艙壁飾面和防噴板的貨艙內襯。
厚度,英寸(毫米) | 0.013 (0.33) 0.023 (0.58) 0.035 (0.89) 0.045 (1.14) 0.059 (1.50) 0.070 (1.78) 0.090 (2.30) |
長度,英寸(毫米) | 片材形式最大 144 英寸(3,658 毫米) 卷狀最大長度為 150 英尺(45,720 毫米) |
寬度,英寸(毫米) | 典型 48 (1,219), 單張形式最多 72 (1,829) 個 最多 60 (1,524) 卷 |
顏色 | 自然的 |
樹脂: 聚酯纖維
加強: 機織無鹼玻璃纖維布
表面: 光滑
規格名稱 | 以前的資格 | 目前的資格 |
---|---|---|
Boeing BMS 8-2 | ||
Class 1 Grade A Types 13-70 | 1076C | 1567A |
請參閱目前資格的 PDS 以取得最新的資料表。
以下測試按照BMS 8-2規範要求進行。
TGC 部件號 | 1076C 13 型 | 1076C 23 型 | 1076C 35 型 | 1076C 45 型 | 1076C 59 型 | 1076C 70 型 | |
---|---|---|---|---|---|---|---|
厚度(毫米) | 0.011 (0.28) | 0.021 (0.53) | 0.033 (0.84) | 0.043 (1.09) | 0.055 (1.40) | 0.066 (1.78) | |
重量,psf (kg/m2) | 0.11 (0.54) | 0.21 (1.03) | 0.32 (1.56) | 0.45 (2.20) | 0.55 (2.68) | 0.64 (3.12) | |
抗拉強度 | 翹曲方向,ksi (mpa) | 62 (427) | 69 (476) | 66 (455) | 83 (572) | 72 (496) | 70 (482) |
填充方向,ksi (mpa) | 48 (331) | 63 (434) | 57 (393) | 62 (427) | 52 (358) | 54 (372) | |
抗彎強度 | 翹曲方向,ksi (mpa) | – | – | – | 60 (413) | 55 (379) | 50 (344) |
填充方向,ksi (mpa) | – | – | – | 55 (379) | 54 (372) | 47 (324) | |
彎曲模量 | 翹曲方向,ksi (mpa) | – | – | – | 2.5 (17.2) | 2.7 (18.6) | 2.8 (19.3) |
填充方向,ksi (mpa) | – | – | – | 2.6 (17.9) | 2.8 (19.3) | 2.9 (20.0) | |
吸水率,% | 0.44 | 0.48 | 0.30 | 0.33 | 0.46 | 0.15 | |
粘合強度,磅(N) | 549 (2,442) | 1094 (4,866) | 851 (3,785) | 868 (3,861) | 1,025 (4,559) | 971 (4,319) | |
易燃 | 符合 FAR 25.853 和 855 附錄 F 第 I 和 III 部分的要求 |
所示數字反映了典型值,不應用作設計規範。
當遵循推薦的預防措施時,本產品可以安全使用和應用。使用本產品前,請閱讀並理解 安全數據表 (SDS),其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息: www.thegillcorp.com.如需銷售和訂購信息,請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.