Gillfab® 4037 是一種夾層板，由玻璃纖維布增強環氧樹脂層壓板和 Dura-Core® II 鋁蜂窩芯製成。
該面板設計用於商務飛機的非結構內飾。
| 厚度，英寸（毫米） | 0.270 (6.86) 0.280 (7.11) 0.390 (9.91) 0.410 (10.41) 0.520 (13.21) 0.530 (13.46) |
| 正面，正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) |
| 長度，英寸（毫米） | 典型 96 (2,438)，最大 144 (3,658) |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最大 68 (1,727) |
粘合劑： 改性環氧樹脂
核： Dura-Core® II aluminum honeycomb
飾面加固： 7581玻纖布
飾面樹脂系統： 環氧樹脂
以下值是 4037 面板的典型值，不應用作設計值。
| TGC 部件號 | 4037 I型 | 4037 II型 | 4037 三型 | |
|---|---|---|---|---|
| 厚度，英寸（毫米） | 0.270 (6.86) | 0.390 (9.91) | 0.520 (13.21) | |
| 標稱飾面厚度1, 英寸 (毫米) | 0.010/0.010 (0.254/0.254) | |||
| 單位面積重量，PSF (kg/m2) | 0.29 (1.42) | 0.32 (1.56) | 0.35 (1.71) | |
| 長梁彎曲2 極限載荷，lbf (N) | 絲帶 | 215 (955) | 130 (595) | 195 (885) |
| 橫 | 190 (855) | 115 (525) | 190 (845) | |
| 面板剪切3 極限載荷，lbf (N) | 絲帶 | 345 (1540) | 380 (1705) | 525 (2340) |
| 橫 | 230 (1040) | 300 (1330) | 370 (1655) | |
| 爬鼓果皮4 扭矩，英吋-磅/3 英吋寬度（牛頓米/76 毫米寬度） | 絲帶 | 50 (5.65) | ||
| 橫 | 60 (6.75) | |||
| 易燃 | 符合 FAR 25.853 應用程序。 F 第一部分 (a)(1)(i) | |||
1 每個飾麵包括兩層 7581 玻璃纖維布。可根據要求提供不同的飾面厚度。
2 Long Beam Bending was tested per ASTM D7249 using 4-point bending configuration. For Type I, 12″ length specimens were tested
using 5″ loading span and 10″ support span. For Types II and III, 24″ length specimens were tested using 10″ loading span and
20″ support span.
3 Panel Shear was tested per ASTM C393 using 3-point bending configuration. For Type I, 5″ length specimens were tested using
3″ support span. For Types II and III, 6″ in length specimens were tested using 4″ support span.
4 根據 ASTM D1781 測試了 Climbing Drum Peel。
| TGC 部件號 | 4037 IV型 | 4037 V型 | 4037 六型 | |
|---|---|---|---|---|
| 厚度，英寸（毫米） | 0.280 (7.11) | 0.410 (10.41) | 0.530 (13.46) | |
| 標稱飾面厚度1, 英寸 (毫米) | 0.020/0.020 (0.508/0.508) | |||
| 單位面積重量，PSF (kg/m2) | 0.49 (2.39) | 0.52 (2.54) | 0.55 (2.69) | |
| 長梁彎曲2 極限載荷，lbf (N) | 絲帶 | 410 (1820) | 300 (1330) | 425 (1900) |
| 橫 | 250 (1110) | 275 (1225) | 380 (1690) | |
| 面板剪切3 極限載荷，lbf (N) | 絲帶 | 475 (2120) | 550 (2445) | 720 (3220) |
| 橫 | 275 (1225) | 300 (1330) | 400 (1775) | |
| 爬鼓果皮4 扭矩，英吋-磅/3 英吋寬度（牛頓米/76 毫米寬度） | 絲帶 | 20 (2.25) | ||
| 橫 | 30 (3.35) | |||
| 易燃 | 符合 FAR 25.853 應用程序。 F 第一部分 (a)(1)(i) | |||
1 每個飾麵包括兩層 7581 玻璃纖維布。可根據要求提供不同的飾面厚度。
2 Long Beam Bending was tested per ASTM D7249 using 4-point bending configuration. For Type IV, 12″ length specimens were tested
using 5″ loading span and 10″ support span. For Types V and VI, 24″ length specimens were tested using 10″ loading span and
20″ support span.
3 Panel Shear was tested per ASTM C393 using 3-point bending configuration. For Type IV, 5″ length specimens were tested using
3″ support span. For Types V and VI, 6″ in length specimens were tested using 4″ support span.
4 根據 ASTM D1781 測試了 Climbing Drum Peel。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
