Gillfab® 4117A 是一種夾層板，由玻璃纖維布增強環氧樹脂層壓板和 Gillcore® HD 蜂窩芯製成。
該面板設計用於商用飛機的非結構內飾和廚房區域。
• Lightweight, high strength construction
• Good self-extinguishing characteristics
• Good corrosion resistance
| 對於 0.010/0.010 飾面 | 對於 0.020/0.020 面 | |
| 厚度，英寸（毫米） | 0.140 (3.56) 0.205 (5.21) 0.260 (6.60) 0.390 (9.91) 0.520 (13.21) 0.640 (16.26) 0.770 (19.56) 1.020 (25.91) | 0.280 (7.11) 0.400 (10.16) 0.530 (13.46) 0.660 (16.76) 0.780 (19.81) 1.030 (26.16) |
| 正面，正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) |
|
| 長度，英寸（毫米） | 典型 96 (2,438)，最大 144 (3,658) | |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最大 68 (1,727) | |
粘合劑： 環氧薄膜
核： Gillcore® HD honeycomb
飾面加固： 玻纖布
飾面樹脂系統： 環氧樹脂
• FAR Part 25.853, 60 second vertical flammability test
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillfab® 5071 | Panel made from Gillcore® HD core and fiberglass cloth reinforced with phenolic resin with low smoke generation. 該面板具有出色的強度重量比，適用於飛機內部應用。 |
| Gillfab® 4122A | Panel made from Gillcore® HD core and fiberglass cloth reinforced with phenolic resin with low smoke generation. 飛機內部應用的良好強度重量比。 |
以下值是 4117A 面板的典型值，不應用作設計值。
| TGC 部件號 | 4117A 第三類 | 4117A 第六型 | 4117A 八型 | 4117A 類型 IX | 4117A X型 | 4117A 十一型 | 4117A 第十二類 |
||
|---|---|---|---|---|---|---|---|---|---|
| 標稱飾面厚度，英寸（毫米） | 0.010/0.010 (0.254/0.254) | 0.020/0.020 (0.508/0.508) | 0.010/0.010 (0.254/0.254) | ||||||
| 面板厚度，英寸 (mm) | 0.260 (6.60) | 0.520 (13.21) | 0.140 (3.56) | 0.280 (7.11) | 0.400 (10.16) | 0.770 (19.56) | 1.020 (25.91) | ||
| 面積重量，psf (kg/m2) | 0.360 (1.76) | 0.410 (2.00) | 0.310 (1.51) | 0.540 (2.64) | 0.575 (2.81) | 0.480 (2.35) | 0.550 (2.69) |
||
| 長梁彎曲，磅 (N) | 極限載荷， 磅力 (N) | 絲帶 | 220 (1000) | 190 (850) | 135 (605) | 345 (1535) | 325 (1455) | 290 (1295) | 410 (1825) |
| 橫 | 155 (695) | 210 (950) | 110 (495) | 175 (795) | 235 (1055) | 310 (1385) | 410 (1845) | ||
| 面板剪切 | 極限載荷， 磅力 (N) | 絲帶 | 320 (1430) | 490 (2190) | 200 (905) | 375 (1680) | 455 (2040) | 705 (3150) | 855 (3805) |
| 橫 | 165 (740) | 275 (1235) | 110 (510) | 190 (865) | 230 (1040) | 385 (1715) | 495 (2210) | ||
| 滾筒剝離 | 扭矩，in-lbf/3 英寸寬（Nm/76mm 寬） | 40 (5.00) | |||||||
| 平面壓縮，PSI (MPa) | 330 (2.95) | ||||||||
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | ||||||||
| TGC 部件號 | 4117A 第十三型 | 4117A 第十六型 | 4117A 第十七型 | 4117A 第十八型 | 4117A 第十九型 | 4117A XX型 | 4117A XXI型 |
||
|---|---|---|---|---|---|---|---|---|---|
| 標稱飾面厚度，英寸（毫米） | 0.020/0.020 (0.508/0.508) | 0.010/0.010 (0.254/0.254) | 0.020/0.020 (0.508/0.508) | 0.020/0.020 (0.508/0.508) | 0.010/0.010 (0.254/0.254) | 0.020/0.020 (0.508/0.508) | 0.010/0.010 (0.254/0.254) |
||
| 面板厚度，英寸 (mm) | 0.780 (19.81) | 0.390 (9.91) | 0.530 (13.46) | 0.660 (16.76) | 0.640 (16.26) | 1.030 (26.16) | 0.205 (5.21) | ||
| 面積重量，psf (kg/m2) | 0.680 (3.32 ) | 0.375 (1.83) | 0.610 (2.98) | 0.645 (3.15) | 0.445 (2.17) | 0 .740 (3.62) | 0.360 (1.76) | ||
| 長梁彎曲1 | 極限載荷， 磅力 (N) | 絲帶 | 575 (2560) | 140 (635) | 410 (1840) | 506 (2265) | 230 (1040) | 740 (3295) | 200 (905) |
| 橫 | 400 (1790) | 160 (720) | 300 (1350) | 340 (1520) | 260 (1165) | 490 (2180) | 125 (565) | ||
| 面板剪切2 | 極限載荷， 磅力 (N) | 絲帶 | 770 (3435) | 400 (1780) | 585 (2610) | 665 (2975) | 600 (2680) | 935 (4165) | 270 (1200) |
| 橫 | 410 (1840) | 215 (965) | 305 (1360) | 345 (1550) | 340 (1515) | 495 (2220) | 140 (625) | ||
| 滾筒剝離3 | 扭矩，in-lbf/3 英寸寬（Nm/76mm 寬） | 40 (5.00) | |||||||
| 平面壓縮4, 磅/平方英寸 (兆帕) | 330 (2.25) | ||||||||
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | ||||||||
<sup>1</sup> Long Beam Bending was tested per ASTM D7249 using 4-point bending configuration. For Types III, VIII, and IX, 12″ length
specimens were tested using 5″ loading span and 10″ support span. For Types VI, X, XI, and XII, 24″ length specimens were tested
using 10″ loading span and 20″ support span.
<sup>2</sup> Panel Shear was tested per ASTM C393 using 3-point bending configuration. For Types III, VIII, and IX, 5″ length specimens were
tested using 3″ support span. For Types VI, X, XI, and XII, 6″ in length specimens were tested using 4″ support span.
3爬升鼓剝離根據 ASTM D1781 進行測試。
4 Flatwise Compression 已根據 ASTM C365 進行測試。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
