Gillfab® 1368B

概述

Gillfab® 1368B series laminates are high strength, low FST grade liners constructed using woven S-glass cloth with a modified phenolic resin system and an optional 1 mil white Polyvinyl Fluoride (PVF) film overlay on the face and/or back side for surface reflectivity and uniform appearance

應用

Cargo liners for cargo compartment, bulkhead facings and blowout panels for aircraft. Also used as backing material for non-textile floor mats used in wet areas of cabin interior (without PVF film overlay). Suitable for passenger-to-freighter conversions.

特徵

  • 高衝擊強度
  • 防火
  • 耐腐蝕
  • 低吸濕性
  • 低煙和毒性產生
  • Service temperature -40°F to 220°F (-40°C to 110°C)
  • Offers 15-20% weight savings compared to Gillfab® 1368A

可用性

Gillfab® 1368B
單面PVF薄膜
厚度英寸(毫米)0.011 (0.280)
0.018 (0.460)
0.026 (0.660)
0.035 (0.889)
0.045 (1.140)
長度標準 144 英寸(3,658 毫米)
最大 168 英寸(4,267 毫米)
寬度標準 48 英寸(1,219 毫米)
最大 72 英寸(1,829 毫米)
雙方標準應要求提供
顏色面側1百萬白色PVF薄膜琥珀色
花崗岩灰
迷霧米色
顏色背面琥珀色琥珀色

建造

加強: 機織玻璃纖維布

樹脂系統: 酚醛樹脂

表面處理: 適用於標準應用的 1 密耳白色 PVF 薄膜覆蓋層

規格

Gillfab® 1368B

  • 波音 BMS 8-223,4 級,B 級,型號 13 至 50
  • CDM010-09 4級B級
  • CPTI001
  • FAR 25.853 和 25.855 附錄 F 第 I、III、IV 和 V 部分

Alternative Gillfab® 1368 Products

Gillfab® 1368 series are high strength, high impact and fire resistant fiberglass reinforced phenolic laminates for aircraft cargo liner applications.

TGC 產品編號不同之處
Gillfab® 1368A高強度、高衝擊、低 FST、玻璃纖維增強酚醛層壓板,適用於飛機貨運班輪應用。
Gillfab® 1368B比1368A更薄、更輕。
Gillfab® 1367C1368A 卷狀結構。
Gillfab® 1368E1368A,層壓板的兩面均粘合有 1 密耳白色 PVF 薄膜。
Gillfab® 1368G極薄、輕量且衝擊強度優於相應類型。
Gillfab® 1367M1368B 卷狀結構。

性能特性,典型

TGC 部件號1368B0111368B0181368B0261368B0351368B045
厚度,英寸(毫米)0.011 (0.28)0.018 (0.46)0.026 (0.66)0.033 (0.84)0.045 (1.14)
Weight, psf (kg/m²)0.10 (0.49)0.16 (0.76)0.24 (1.15)0.30 (1.46)0.44 (2.17)
Impact Strength¹, ft·lbf (N·m)11 (15)20 (27)23 (31)27 (37)30 (41)
Edge Bearing², kpsi (mpa)39 (269)
充滿46 (317)
Climbing Drum Peel³, lbf/3 inch width (N/76 mm width)40 (178)
充滿54 (240)
Double Point Edge Bearing²lbf (N)345 (1530)不適用
充滿338 (1500)不適用
Overlay Film Peel⁴ lb/in (N/mm) 2.5 (0.44) – No PVF Film Separation
易燃符合 FAR 25.853 和 855 附錄 F 第 I 和 III 部分的要求

所示數字反映了典型值,不應用作設計規範。
¹ – Calculated per ASTM D5420 using a modified dart and specimen test frame.
² – Tested per ASTM D953 using a modified test fixture.
³ – Tested per ASTM D1781.
⁴ – Tested using a modified ASTM D3330 using a standard tape to peel PVF film overlay.

加入我們的團隊

將您的職業提升到一個新的水平並突破可能性的極限。

Gill Corporation 提供的產品可以解決您的挑戰。