Gillfab® 4004A 是一種低煙夾芯板，由單向玻璃纖維增強酚醛面板粘合到 Gillcore® HD 間位芳綸蜂窩芯材製成。
此面板設計用作高負載區域的乘客地板，例如商用飛機的入口、廚房和衛生間。
| 厚度，英寸（毫米） | 典型值 0.410 (10.4) |
| 長度，英寸（毫米） | 典型 96 (2,438) 最多 144 (3,658) |
| 寬度，英寸（毫米） | 典型 48 (1,219) 最多 60 (1,524) |
| 飾面厚度，英吋（毫米），正面/背面 | 0.015/0.015 (0.381/0.381) 和 0.030/0.015 (0.762/0.381) |
粘合劑： 環氧樹脂
核： Gillcore® HD meta-aramid
飾面加固： 單向玻璃纖維
飾面樹脂系統： 酚醛樹脂
| TGC 產品編號 | 不同之處 |
|---|---|
| Gillfab® 4004B | 為商用飛機的貨艙地板提供額外的面板厚度和蜂窩選項。 |
以下測試依照 BAER 3232 規範要求進行。
| TGC 部件號 | 4004A* |
|---|---|
| 重量，psf (kg/m2) | 0.784 (3.83) |
| 長梁彎曲，磅英吋/英吋寬度 (N) | 489 (2,175) |
| 偏轉@170磅，英吋（@756N，毫米） | 0.20 (5.08) |
| 短梁剪切強度，psi (Mpa) | 837 (5.77) |
| 平面抗壓強度，psi (Mpa) | 2,358 (16.26) |
| Drum Peel, in-lbs/3″ width (N/76mm width), face/back | 12/15 (53/67) |
| 80 吋跌落高度下的衝擊 | 無損傷 |
| 易燃 | 了解 FAR 25.853 應用程序 F 第 I 部分 |
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
