Gillfab® 4034 is a lightweight and high performance sandwich panel made from unidirectional carbon fiber reinforced epoxy facings bonded to aluminum core.
The panel is designed for use in aircraft cabin interior structures such as galleys, lavatories, bulkheads, partitions, storage compartments and electronic pocket doors.
| 厚度，英寸（毫米） | 0.125 (3.18) 0.250 (6.35) 0.375 (9.53) 0.500 (12.70) 0.625 (15.88) 0.750 (19.05) |
| 飾面厚度，正面/背面，英寸 (mm) | 0.010/0.010 (0.254/0.254) 0.020/0.020 (0.508/0.508) |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最大 60 (1,524) |
| 長度，英寸（毫米） | 典型 96 (2,438)，最大 144 (3,658) |
粘合劑： 環氧薄膜
核： 鋁5052
飾面加固： 帶玻璃布覆蓋層和底層的單向碳纖維
飾面樹脂系統： 環氧樹脂
以下測試按照 Dassault Dwg 運行。 7700262。
| TGC 零件號 | 4034-500 | |
|---|---|---|
| 重量，psf (kg/m2) | 0.385 (1.88)* | |
| 長梁彎曲，磅 (N) 503 (2,237) | ||
| 撓度 @ 100 磅，英寸（@ 445N，毫米） | 0.234 (5.94) | |
| 面板剪力，磅 (N) | 大號 W | 240 (1,068) 139 (618) |
| Drum Peel, in-lbs/3″ width (N/76mm width) | 臉 後退 | 32 (142) 31 (138) |
| 穩定壓縮，psi（N/mm2) | 336 (2.32) | |
| 翹曲度，英寸/英尺（毫米/米） | 0.04 (1.02) | |
| 易燃 | 了解 FAR 25.853 應用程序 F 第 I 部分 | |
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
