Gilliner® 1066 is a general purpose laminate made from fiberglass cloth reinforced polyester resin. Gilliner® 1066 is available with a 1 mil white polyvinyl fluoride film overlay (Gilliner® 1066T) on the face side or with bondable surface panel facings (Gilliner® 1066S). Gilliner® 1066 comes in sheet or roll stock. Request Gilliner®1066R for thicknesses under 0.060 inch (1.52 mm).
该层压板专为通用飞机货舱内衬而设计。
Gilliner® 1066 (表格形式) | Gilliner® 1066 (卷状) |
|
---|---|---|
厚度,英寸(毫米) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) 0.070 (1.778) 0.075 (1.905) 0.090 (2.286) 0.125 (3.175) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) |
长度,英寸(毫米) | 标准 144 (3,658) 最多 168 (4,267) | 标准 150 英尺 (45,720) 最大 150 英尺 (45,720) |
宽度,英寸(毫米) | 标准 48 (1,219) 最多 60 (1,524) | 标准 48 (1,219) 最多 60 (1,524) |
树脂系统: 聚酯树脂
加强: 机织玻璃纤维布
TGC 产品编号 | 不同之处 |
---|---|
Gilliner® 1366T | 玻璃纤维/聚酯层压板具有更高的冲击强度和抗穿刺性。 |
以下测试按照 DMS 1946 进行。
TGC产品 | 1066-013 | 1066-016 | 1066-023 | 1066-030 | 1066-045 | 1066-060 | |
---|---|---|---|---|---|---|---|
重量,psf (kg/m2) | 0.12 (0.60) | 0.19 (0.91) | 0.22 (1.05) | 0.30 (1.42) | 0.44 (2.14) | 0.60 (2.80) | |
边缘轴承,ksi (Mpa) | 经 | 28 (193) | 39 (269) | 28 (193) | 30 (207) | 32 (221) | 38 (262) |
充满 | 32 (221) | 34 (234) | 25 (172) | 32 (221) | 61 (421) | 43 (296) | |
螺栓连接强度,lbs (N) | 经 | 258 (1,148) | 169 (752) | 401 (1,784) | 239 (1,063) | 453 (2,015) | 653 (2,905) |
充满 | 240 (1,068) | 179 (796) | 365 (1,624) | 274 (1,219) | 569 (2,531) | 409 (1,819) | |
冲击强度,ft-lbs (Nm) | 6 (8) | 9 (12) | 11 (15) | 17 (23) | 25 (34) | 35 (48) | |
吸水率,% | 1.5 | 1.3 | 1.3 | 1.6 | 2.9 | 2.1 | |
易燃 | 符合 FAR 25.853 和 855 第 I 部分和 III 部分 |
所示数字反映了典型值,不应用作设计规范。
当遵循推荐的预防措施时,本产品可以安全使用和应用。使用本产品前,请阅读并理解 安全数据表 (SDS),其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到: www.thegillcorp.com.如需销售和订购信息,请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.