We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gilliner® 1066 is a general purpose laminate made from fiberglass cloth reinforced polyester resin. Gilliner® 1066 is available with a 1 mil white polyvinyl fluoride film overlay (Gilliner® 1066T) on the face side or with bondable surface panel facings (Gilliner® 1066S). Gilliner® 1066 comes in sheet or roll stock. Request Gilliner®1066R for thicknesses under 0.060 inch (1.52 mm).
The laminate is designed for general purpose aircraft cargo compartment liner.
Gilliner® 1066 (Sheet form) | Gilliner® 1066 (Roll form) |
|
---|---|---|
Thickness, inch (mm) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) 0.070 (1.778) 0.075 (1.905) 0.090 (2.286) 0.125 (3.175) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) |
Length, inch (mm) | Standard 144 (3,658) Maximum 168 (4,267) | Standard 150 feet (45,720) Maximum 150 feet (45,720) |
Width, inch (mm) | Standard 48 (1,219) Maximum 60 (1,524) | Standard 48 (1,219) Maximum 60 (1,524) |
Resin System: Polyester resin
Reinforcement: Woven fiberglass cloth
TGC Product No. | Difference |
---|---|
Gilliner® 1366T | Fiberglass/polyester laminate with higher impact strength and puncture resistance. |
The following tests are run in accordance with DMS 1946.
TGC Product | 1066-013 | 1066-016 | 1066-023 | 1066-030 | 1066-045 | 1066-060 | |
---|---|---|---|---|---|---|---|
Weight, psf (kg/m2) | 0.12 (0.60) | 0.19 (0.91) | 0.22 (1.05) | 0.30 (1.42) | 0.44 (2.14) | 0.60 (2.80) | |
Edge Bearing, ksi (Mpa) | Warp | 28 (193) | 39 (269) | 28 (193) | 30 (207) | 32 (221) | 38 (262) |
Fill | 32 (221) | 34 (234) | 25 (172) | 32 (221) | 61 (421) | 43 (296) | |
Bolted Joint Strength, lbs (N) | Warp | 258 (1,148) | 169 (752) | 401 (1,784) | 239 (1,063) | 453 (2,015) | 653 (2,905) |
Fill | 240 (1,068) | 179 (796) | 365 (1,624) | 274 (1,219) | 569 (2,531) | 409 (1,819) | |
Impact Strength, ft-lbs (N-m) | 6 (8) | 9 (12) | 11 (15) | 17 (23) | 25 (34) | 35 (48) | |
Water absorption, % | 1.5 | 1.3 | 1.3 | 1.6 | 2.9 | 2.1 | |
Flammability | Meets FAR 25.853 & 855 Part I & III |
Figures shown reflect typical values and should not be used as design specifications.
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com