Gillfloor® 5007C and 5007D are cargo floor panels made with fiberglass reinforced polyester skin bonded to end-grain balsa core. The panels were developed for durability and high impact resistance for use in areas subjected to high volume traffic. Gillfloor® 5007C offers varieties in panel and facing thickness. Gillfloor® 5007D is a lighter, more economical alternative of 5007C.
Gillfloor® 5007C and D are designed for use as flooring in cargo compartment and other high traffic areas.
| Gillfloor® 5007C | Gillfloor® 5007D | ||
|---|---|---|---|
| 厚度，英寸（毫米） | 0.375 (9.52) 0.400 (10.16) 0.410 (10.41) 0.500 (12.7) 0.750 (19.05) 1.40 (35.56) | 0.400 (10.16) 0.625 (15.88) |
|
| 长度，英寸（毫米） | 典型 144 (3,658)，最大 168 (4,267) | ||
| 宽度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) | ||
| 饰面，英寸（毫米） | 脸 | 0.025 (0.635) 0.040 (1.02) 0.045 (1.14) | 0.065 (1.65) 0.085 (2.16) |
| 后退 | 0.025 (0.635) 0.030 (0.762) 0.040 (1.02) 0.045 (1.14) | 0.030 (0.76) | |
核： 轻木
饰面加固： 带垫层的玻璃纤维布
饰面树脂系统： 聚酯纤维
Gillfloor® 5007C
Gillfloor® 5007D
以下测试是根据 ASTM 标准方法进行的。
| TGC 部件号 | 5007C | 5007D | |
|---|---|---|---|
| 面，英寸（毫米） | 0.045/0.025 | 0.065/0.022 | |
| 重量，psf (kg/m2) | 1.107 (5.40) | 1.089 (5.32) | |
| 厚度（毫米） | 0.400 (10.16) | 0.391 (9.93) | |
| 爬鼓果皮1，宽度，英寸-磅/3 英寸（牛米/76 毫米） | 脸 | 30 (3.41) | 38 (4.31) |
| 后退 | 28 (3.15) | 46 (5.21) | |
| 长梁弯曲2, 磅 (N) / 100 磅时的挠度，英寸 (毫米) | 长度方向 | 501 (2,228)/0.581 (14.8) | 不适用 |
| 宽度方向 | 398 (1,770)/0.701 (17.8) | 441 (1,962)/0.650 (16.5) | |
| 冲击强度3, 英寸-磅 (Nm) | 82.3 (9.30) | 93.4 (10.55) | |
| 平面压缩4, 磅/平方英寸 (兆帕) | 1,600 (11.4) | 不适用 | |
| 面板剪切2, 磅 (N) | 长度 | 693 (3,080) | 590 (2,620) |
| 宽度 | 685 (3,070) | 646 (2,870) | |
| 抗磨性5, 每克重量损失 (盎司) / 1000 个周期 | 0.034 (0.0012) | 不适用 | |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | ||
1ASTM D 1681
2ASTM D 7249（以前的 C 393）
3ASTM D 5420，加德纳冲击试验
4ASTM C 365
5ASTM D 1242
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
