Gillfloor® 5007C/5007D

Overview

Gillfloor® 5007C and 5007D are cargo floor panels made with fiberglass reinforced polyester skin bonded to end-grain balsa core. The panels were developed for durability and high impact resistance for use in areas subjected to high volume traffic. Gillfloor® 5007C offers varieties in panel and facing thickness. Gillfloor® 5007D is a lighter, more economical alternative of 5007C.

Applications

Gillfloor® 5007C and D are designed for use as flooring in cargo compartment and other high traffic areas.

Features

High impact resistance
High abrasion resistant
High peel strength
Durable performance in cargo compartments
Service temperature range: -65°F to 180°F (-54°C to 82°C)

Availability

		Gillfloor® 5007C	Gillfloor® 5007D
Thickness, inch (mm)		0.375 (9.52) 0.400 (10.16) 0.410 (10.41) 0.500 (12.7) 0.750 (19.05) 1.40 (35.56)	0.400 (10.16) 0.625 (15.88)
Length, inch (mm)		Typical 144 (3,658), Maximum 168 (4,267)
Width, inch (mm)		Typical 48 (1,219), Maximum 72 (1,829)
Facings, inch (mm)	Face	0.025 (0.635) 0.040 (1.02) 0.045 (1.14)	0.065 (1.65) 0.085 (2.16)
Facings, inch (mm)	Back	0.025 (0.635) 0.030 (0.762) 0.040 (1.02) 0.045 (1.14)	0.030 (0.76)

Construction

Core: Balsa wood

Facings Reinforcement: Fiberglass cloth with mat overlay

Facings Resin System: Polyester

Specifications

Gillfloor® 5007C

FAR 25.855 – 12 second vertical and 45° flammability requirements
FAR 25.853 – 60 second vertical flammability requirement

Gillfloor® 5007D

FAR 25.853 and 25.855: 60 and 12 second vertical burn test, and 45° tests

Performance Properties, Typical

The following tests are run in accordance with ASTM standard methods.

TGC Part Number		5007C	5007D
Facing, inch (mm)		0.045/0.025	0.065/0.022
Weight, psf (kg/m²)		1.107 (5.40)	1.089 (5.32)
Thickness, in (mm)		0.400 (10.16)	0.391 (9.93)
Climbing Drum Peel¹, width, in-lbs/3 in (N-m/76mm)	Face	30 (3.41)	38 (4.31)
Climbing Drum Peel¹, width, in-lbs/3 in (N-m/76mm)	Back	28 (3.15)	46 (5.21)
Long Beam Bending², lbs (N) / Deflection at 100 lbs, in (mm)	Length direction	501 (2,228)/0.581 (14.8)	N/A
	Width direction	398 (1,770)/0.701 (17.8)	441 (1,962)/0.650 (16.5)
Impact Strength³, in-lbs (N-m)		82.3 (9.30)	93.4 (10.55)
Flatwise Compression⁴, psi (Mpa)		1,600 (11.4)	N/A
Panel Shear², lbs (N)	Length	693 (3,080)	590 (2,620)
	Width	685 (3,070)	646 (2,870)
Abrasion Resistance⁵, weight loss per grams (oz) / 1000 cycles		0.034 (0.0012)	N/A
Flammability		Meet FAR 25.853 App F Part I (a)(1)(i)

¹ASTM D 1681
²ASTM D 7249 (previously C 393)
³ASTM D 5420, Gardner impact test
⁴ASTM C 365
⁵ASTM D 1242

Figures shown reflect typical values and should not be used as design specifications.

Health Precautions

This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.

Disclaimer

All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.

Gillfloor® 5007C/5007D

Overview

Applications

Features

Availability

Construction

Specifications

Performance Properties, Typical

Health Precautions

Disclaimer

Join Our Team

Take your career to the next level and push the limits of possibility.

The Gill Corporation provides the products that solve your challenges.

Explore

Read

Collaborate

Resources

Connect