Gillfloor® 5424 是一种高强度地板，由单向玻璃纤维增强环氧饰面粘合到铝蜂窝芯制成。这种多功能地板适用于客舱和货舱。
适用于客货舱的多功能地板面板。 5424 I 型用于低流量区域，例如座椅下方。 II型用于人流量大的区域，例如过道和入口。 III 型与 II 型相似，但饰面较厚，用于交通繁忙和其他重型区域，例如过道、厨房或其他高负载区域。
| 第5424章 | 第5424章 | 第5424章 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.400 (10) | ||
| 正面、正面/背面英寸（毫米） | 0.015/0.015 (0.381/0.381) | 0.018/0.018 (0.457/0.457) | 0.022/0.022 (0.559/0.559) |
| 长度和宽度，英寸（毫米） | 典型 48 x 144 (1,219 x 3,658) | ||
| 蜂窝 | 5052铝低密度 | 5052中密度铝 | 5052中密度铝 |
粘合剂： 环氧树脂
核： 5052合金铝蜂窝
饰面加固： 单向玻璃纤维
饰面树脂系统： 环氧树脂
| TGC 产品编号 | 应用 | 替代吉尔产品 |
|---|---|---|
| Gillfloor® 5424 Type I | 低人流量区域，座椅下方 | Gillfloor® 4709 Ty III/ epoxy graphite facings bonded to low-density Gillcore®HD meta-aramid core Gillfloor® 4809 Ty VI/ epoxy graphite facings bonded to low-density Gillcore®HK para-aramid core Gillfloor® 4417 Ty I/ epoxy fiberglass facings bonded to low-density Gillcore®HD meta-aramid core Gillfloor® 4518 Ty X/ epoxy fiberglass facings bonded to low-density Gillcore®HK para-aramid core |
| Gillfloor® 5424 Ty II | 过道和入口 | Gillfloor® 4709 Ty II/ epoxy graphite facings bonded to medium-density Gillcore®HD meta-aramid core Gillfloor® 4809 Ty VII/ epoxy graphite facings bonded to medium-density Gillcore®HK para-aramid core Gillfloor® 4417 Ty II/ epoxy fiberglass facings w bonded to medium-density Gillcore®HD meta-aramid® core Gillfloor® 4518 Ty XI/ epoxy fiberglass facings bonded to low-density Gillcore®HK para-aramid core |
| Gillfloor® 5424 Ty III | 人流量大的区域、厨房 | Gillfloor® 4417 Ty III/ thicker epoxy fiberglass facings bonded to medium-density Gillcore® HD meta-aramid core |
以下测试按照 BMS 4-23 规范要求进行。
| TGC 部件号 | 第5424章 | 第5424章 | 第5424章 |
|---|---|---|---|
| 重量，psf (kg/m2) | 0.53 (2.59) | 0.62 (3.03) | 0.72 (3.51) |
| 长梁弯曲，磅 (N) | 303 (1,348) | 328 (1,460) | 445 (1,980) |
| 挠度 @ 100 磅，英寸（@ 445N，毫米） | 0.73 (19) | 0.70 (18) | 0.28 (7) |
| 面板剪切力，磅 (N) | 1,079 (4,800) | 1,228 (5,462) | 1,566 (6,966) |
| Drum Peel, in-lb/3″ width (N/76mm width) | 48 (214) | 48 (214) | 45 (200) |
| 核心压缩力，psi (N/mm2) | 1,037 (7) | 1,625 (11) | 1,633 (11) |
| 冲击强度，英寸-磅（牛米） | 111 (12.54) | 107 (12.09) | 126 (14.2) |
| 插入剪切力，磅 (N)* | 1,491 (6,632) | 1,736 (7,722) | 1,540 (6,850) |
| 平面内剪切力，lbs/in (N/mm) | 426 (75) | 462 (81) | 507 (87) |
| 翘曲，英寸/英尺 | <0.025 (2.1) | <0.025 (2.1) | <0.025 (2.1) |
| 滚轮车，周期，磅/轮（N/轮） | 没有抑郁症： 80k, 158 (700) | 没有抑郁症： 120k, 250 (1,100) | 没有抑郁症： 120k, 250 (1,100) |
| 易燃 | 符合 FAR 25.853 和 855 附录 F 第 I 部分 | ||
*5L5107 所示数字反映的是典型值，不应用作设计规格。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
