Gilpatch® 6006 系统是一种玻璃纤维增强聚酯层压板，背面涂有压敏粘合剂。
Gillpatch® 6006 is designed as a patch for repairing holes and tears in cargo compartment liners.
Gillpatch® 6006 is approved for use in Class B and E cargo compartment as defined in FAR 25.857.
| 厚度，英寸（毫米） | 0.026 (0.660) |
| 尺寸，英寸 x 英寸（毫米 x 毫米） | 114 x 114 (4.5 x 4.5)、152 x 152 (6 x 6)、229 x 229 (9 x 9) 和 305 x 305 (12 x 12) |
| 板料，英寸 x 英寸（毫米 x 毫米） | 最大 36 x 72 (914 x 1,829) |
粘合剂： 压敏胶
树脂： 聚酯树脂
加强： 机织玻璃纤维布
| TGC 产品编号 | 不同之处 |
|---|---|
| Gillpatch® III 6306 | 玻璃纤维/酚醛层压板，背面有粘合剂。与 6006 和 1367P 相比具有更高的冲击强度。 |
以下测试是根据 ASTM 标准方法进行的。
| TGC 部件号 | 60061 | |
|---|---|---|
| 重量，psf (kg/m2) | 0.60 (2.93) | |
| 抗弯强度2, 西 (兆帕) | 18 (124) | |
| 煮沸2小时后 | 12 (83) | |
| 弯曲模量2, 微星 (Gpa) | 0.8 (5.52) | |
| 煮沸2小时后 | 0.5 (3.4) | |
| 抗拉强度3, 西 (兆帕) | 38 (262) | |
| 煮沸2小时后 | 30 (207) | |
| 拉伸模量3, 微星 (Gpa) | 0.8 (5.52) | |
| 煮沸2小时后 | 0.5 (3.4) | |
| 抗压强度4, 西 (兆帕) | 9 (62) | |
| 煮沸2小时后 | 6 (41) | |
| 承重强度5, 西 (兆帕) | 12 (83) | |
| 剪切强度6, 西 (兆帕) | 18 (124) | |
| 树脂含量，% | 38 | |
| 巴氏硬度7 | 30 | |
| 吸水率8, % | 2.5 | |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(ii) | |
1在背面没有粘合剂的 0.015 层压板上进行测试。
2ASTM D790，经向
3ASTM D638，经向
4ASTM D695
5ASTM D953
6ASTM D732
7Barcol 是没有单位的相对硬度测量
8ASTM D570
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
