Gillfab® 5023A is a lightweight and low smoke emission sandwich panel made from woven fiberglass reinforced phenolic facings bonded to foam core.
该面板设计用于飞机机舱内部结构以及航空航天服务推车和手推车。面板还可用于需要具有耐火性和低烟雾排放的泡沫芯板的非航空航天应用。
| 厚度，英寸（毫米） | 0.177 (4.50) |
| 面层厚度， 正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) |
| 长度，英寸（毫米） | 标准值 96.4 (2,448) |
| 宽度，英寸（毫米） | 标准 39.7 (1,008) |
| 泡沫芯密度 立方英尺（公斤/米3) | 4.37 (70), 6.24 (100), 9.36 (150) |
可根据要求提供替代面部皮肤。
粘合剂： 改性酚醛
核： 泡沫芯层
面筋加固： 玻纤布
饰面树脂系统： 酚醛树脂
可在一侧或两侧添加 1 密耳白色聚氟乙烯薄膜覆盖层。
| TGC 部件号 | 5023A | ||
|---|---|---|---|
| PET泡沫密度pcf (kg/m3) | 4.37 (70) | 6.24 (100) | 9.36 (150) |
| 厚度（毫米） | 0.177 (4.50) | 0.177 (4.50) | 0.177 (4.50) |
| 重量，psf (kg/m2) | 0.305 (1.49) | 0.333 (1.63) | 0.379 (1.85) |
| 长梁弯曲1, 磅力 (N), 色带 | 60 (266) | 100 (444) | 160 (711) |
| 稳定压缩2, 磅/平方英寸 (兆帕) | 140 (0.965) | 210 (1.44) | 400 (2.75) |
| 导热系数3, BTU-英寸/hrft2°F (W/mK) | 0.2746 (0.0396) | ||
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | ||
所示表格反映了典型值，不应用作设计规范。
<sup>1</sup>Long Beam Bending was tested and calculated per ASTM D7249 (Quarter Point Loading – 12-inch specimen)
2根据 ASTM C365 测试和计算稳定压缩。
3导热率根据 ASTM C518 进行测试和计算。
所示数字反映了典型值，不应在设计规范中使用。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
