Gillfab® 5075 is a family of light weight and high performance sandwich panels made from woven fiberglass reinforced phenolic facing bonded to Gillcore® HD meta-aramid honeycomb. Gillfab® 5075 is the basic construction. Gillfab® 5075T offers options of 2 mil white polyvinyl fluoride film or 1.5mil granite gray polyvinyl fluoride film on the back side of the panel. Gillfab® 5075E offers the same options on both sides of the panel.
该面板设计用于飞机机舱内部结构，如厨房、卫生间、舱壁、隔板、储物舱和机组人员休息区。
| 厚度，英寸（毫米） | 0.250 (6.35) 0.375 (9.53) 0.500 (12.7) 0.750 (19.05) 1.00 (25.40 |
| 正面，正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) 0.015/0.015 (0.381/0.381) 0.020/0.020 (0.508/0.508) |
| 长度，英寸（毫米） | 典型 60 (1,524)，最大 144 (3,658) |
| 宽度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) |
| 蜂窝 | Light-density Gillcore® HD Meta-aramid Honeycomb |
粘合剂： 热熔胶
核： Gillcore® HD meta-aramid
饰面加固： 机织玻璃纤维布
饰面树脂系统： 酚醛树脂
以下测试按照 SAE 航空航天材料规范和 ASTM 标准方法进行。
| TGC 部件号 | 5075 | |
|---|---|---|
| 面板重量，psf（kg/m2) | 0.5 (2.3) | |
| 面板厚度，英寸 (mm) | 1.00 (25.40) | |
| Drum Peel1, in-lbs/3″ width (N-m/76mm width) | 25 (2.82) | |
| 加德纳冲击强度2, 英寸-磅 (Nm) | 15 (1.69) | |
| 平面压缩1, 磅/平方英寸 (兆帕) | 284 (1.96) | |
| 面板剪切强度1, 磅 (N) | 丝带 | 745 (3,314) |
| 横 | 431 (1,917) | |
| 长梁弯曲1, 磅 (N) | 丝带 | 392 (1,744) |
| 烟雾排放量，Ds | 了解 FAR 25 应用程序 F 第五部分 | |
| 热释放率 | 了解 FAR 25 应用程序 F 第 IV 部分 | |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | |
*基于 0.015/0.015 端面
1AMS 标准 401B
2ASTM D5420
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
