STRIKEGRID® CEAF is a phosphoric acid anodized (PAA) continuous expanded aluminum foil (CEAF) product that also includes a proprietary coating which combines to negate the effects of galvanic corrosion when used in conjunction with carbon prepreg materials. STRIKEGRID® can be bonded to aircraft structures either as an outer ply or embedded ‘one-ply down’ beneath a layer of surfacing film.
STRIKEGRID® CEAF is now available in continuous roll form for SG-3 (2 mil) in 24” wide rolls and SG-4 (4 mil) material in 36” wide rolls. Both SG-3 and SG-4 are 2,500 linear foot rolls (splices allowed per roll will be two or less, with a minimum 50 feet between splice locations).
| 卷筒宽度 | 长度（线性英尺） | 面积（平方英尺） | 长度（米） | 面积（平方米） |
|---|---|---|---|---|
| 24″ (610mm) | 250 至 1,250 | 500 至 2,500 | 76.2 至 381 | 46.5 至 232 |
| 36″ (915mm) | 167 至 833 | 500 至 2,500 | 51 至 254 | 46.5 至 232 |
| 产品名称 | SG-3 | SG-4 |
|---|---|---|
| 年级 | 013 | 016 |
| 铝合金 | 1145 | 1145 |
| 宽度，英寸（毫米） | 24″ (610) | 24″ to 36″ (610 to 915) |
| 重量，每平方英尺（gsm） | 0.013 (63) | 0.016 (78) |
| 总厚度，英寸（毫米） | 0.002 (0.050) | 0.004 (0.100) |
波音 BMS 8-336，SG-3 的 1 型、2 级、013 级、B 型、F 型材料规范，2 密耳厚材料和 SG-1 型、2 级、016 级、B 型、F 型材料规范4、4密尔厚的材料。波音 BMS 8-336、波音 D-800、古德里奇 RMS-0523、哈飞航空 Q/2AJ640-2009、三菱 (MHI) 5200MAS、MRAS STMB-M533、Spirit AeroSystems SMS-110101B。
STRIKEGRID® CEAF is currently used on Boeing B737, B777, B787, 747-8 and the MRJ (Mitsubishi Regional Jet) aircraft.
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
