Gillfab ® 4122S 是一种轻质、低烟排放夹层板，由编织玻璃增强酚醛饰面粘合到间位芳纶蜂窝芯制成。可根据要求在一侧或两侧添加 1 密耳白色聚氟乙烯薄膜覆盖层。
这种多功能面板通常用于飞机内部应用，例如侧壁、货舱、舱壁、厨房、盥洗室和天花板。
| 厚度1, 英寸 (毫米) | 0.250 (6.35) 0.500 (12.70) 0.750 (19.05) 1.000 (25.40) |
| 长度，英寸（毫米） | 典型 144 (3,658) |
| 宽度，英寸（毫米） | 典型 48 (1,219) |
| 颜色 | 自然色或白色 |
1 可根据要求提供不同的面板厚度
粘合剂： 改性酚醛
核： Gillcore® HD honeycomb
饰面加固： 7781玻璃纤维布
饰面树脂系统： 酚醛树脂
可根据要求在一侧或两侧添加 1 百万白色聚氟乙烯薄膜覆盖层。
以下值是 4122S 面板的典型值，不应用作设计值。
可根据要求提供 FAA 批准的 4122S250、4122S500 和 4122S750 机械性能 B 基础许用值以及 FAA 表格 8110-3。
| TGC 部件号 | 4122S250 | 4122S500 | 4122S750 | 4122S1.0 | ||
|---|---|---|---|---|---|---|
| 物性 | ||||||
| 面板厚度，英寸 (mm) | 0.247 (6.2) | 0.497 (12.6) | 0.744 (18.9) | 1.000 (25.4) | ||
| 标称饰面厚度 1 , 英寸 (毫米) | 0.020/0.020 (0.508/0.508) |
|||||
| 单位面积重量，PSF (kg/m2) | 0.48 (2.34) | 0.54 (2.64) | 0.60 (2.93) | 0.65 (3.17) | ||
| 机械性能 | ||||||
| 长梁弯曲2 | 极限载荷，lbf (N) | 丝带 | 75 (334) | 200 (890) | 290 (1290) | 360 (1601) |
| 横 | 80 (356) | 190 (845) | 275 (1223) | 340 (1512) | ||
| 面板极限强度，ksi (MPa) | 丝带 | 30 (207) | ||||
| 横 | 30 (207) | |||||
| 短梁剪3 | 极限载荷，lbf (N) | 丝带 | 280 (1246) | 475 (2113) | 670 (2980) | 755 (3358) |
| 横 | 145 (645) | 265 (1179) | 375 (1668) | 455 (2024) | ||
| 核心剪切极限强度，psi (MPa) | 丝带 | 200 (1.38) | 160 (1.10) | 150 (1.03) | 125 (0.86) | |
| 横 | 105 (0.72) | 90 (0.62) | 85 (0.59) | 77 (0.53) | ||
| 核心压缩极限强度4, 磅/平方英寸 (兆帕) | 420 (2.90) | 355 (2.45) | 335 (2.31) | 335 (2.31) | ||
| 平面内剪切极限强度5, 磅力/英寸 (N/mm) | 不适用 | 不适用 | 455 (80) | 不适用 | ||
| 易燃性 | ||||||
| 易燃 | 符合 FAR 25.853 和 855 App。第一部分 | |||||
1 每个饰面包括两层 7781 玻璃纤维布。可根据要求提供不同的饰面厚度。
2 Long Beam Bending was tested and Facesheet Ultimate Strength was calculated per ASTM D7249. Specimens were tested with 4-point bending configuration (4” loading span and 22” support span).
3 Short Beam Shear was tested and Core Shear Ultimate Strength was calculated per ASTM C393. Specimens were tested with 3-point bending configuration (6” support span).
4 核心压缩根据 ASTM C365 进行测试和计算。
5 平面内面板剪切试样根据 ASTM D8067 进行测试。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
