Gillfab® 5433F is a hybrid laminate made from aluminum facings bonded to a woven and unidirectional fiberglass reinforced epoxy laminate.
该层压板设计用作货舱地板，用于人流量大的区域，例如货舱门区域和散装货物区域。
| 厚度，英寸（毫米） | 0.058 (1.47) |
| 长度，英寸（毫米） | 典型 96 (2,438) 最多 144 (3,658) |
| 宽度，英寸（毫米） | 典型 48 (1,219) |
| 饰面（正面/背面），英寸（毫米） | 0.016/0.020 (0.406/0.508) 和 0.020/0.016 (0.508/0.406) |
加强： Epoxy woven and unidirectional fiberglass reinforced laminate
面向： 铝合金 2024-T3
| TGC 部件号 | 5433F1 | |
|---|---|---|
| 厚度，英寸（毫米） | 0.054 (1.37) | |
| 重量，psf (kg/m2) | 0.72 (3.51) | |
| 冲击强度2, 英尺-磅 (Nm) | 31 (42.0) | |
| 抗拉强度3, 西 (兆帕) | 纵 | 86 (593) |
| 长横 | 96 (662) | |
| Roller Peel Strength4, lbs/inch (N/25mm) | 面侧 | 37 (165) |
| 吸水率5, % | 0 | |
| 易燃 | 符合 25.853 & 855 第 I 和 III 部分的要求 | |
所示表格反映了典型值，不应用作设计规范。
1 – Test based on 5433F laminates with 0.016”/0.020” facings.
2 – Impact Strength was tested and calculated per ASTM D5420 using a modified dart
and specimen test frame.
3 – Tensile Strength was tested and calculated per ASTM B557.
4 – Roller Peel Strength was tested and calculated per ASTM D3167.
5 – Water absorption was tested calculated per ASTM D570.
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
