Gillfab® 5433F

Overview

Gillfab® 5433F is a hybrid laminate made from aluminum facings bonded to a woven and unidirectional fiberglass reinforced epoxy laminate.

Applications

The laminate is designed for use as a cargo compartment flooring panel in high traffic areas such as the cargo compartment door area and in bulk cargo areas.

Features

Dent, puncture, and abrasion resistant
High strength
Fire resistant
Recommended service temperature range: up to 160°F (71°C)

Availability

Thickness, inch (mm)	0.058 (1.47)
Length, inch (mm)	Typical 96 (2,438) Maximum 144 (3,658)
Width, inch (mm)	Typical 48 (1,219)
Facings (face/back), inch (mm)	0.016/0.020 (0.406/0.508) and 0.020/0.016 (0.508/0.406)

Construction

Reinforcement: Epoxy woven and unidirectional fiberglass reinforced laminate

Facing: Aluminum Alloy 2024-T3

Specifications

FAR 25.853 and 25.855 Appendix F Part I

Performance Properties, Typical

TGC Part Number		5433F¹
Thickness, inch (mm)		0.054 (1.37)
Weight, psf (kg/m²)		0.72 (3.51)
Impact Strength², ft-lbs (N-m)		31 (42.0)
Tensile Strength³, ksi (MPa)	Longitudinal	86 (593)
	Long transverse	96 (662)
Roller Peel Strength⁴, lbs/inch (N/25mm)	Face side	37 (165)
Water absorption⁵, %		0
Flammability		Meets requirement of 25.853 & 855 Part I and III

Table shown reflects typical values and should not be used as design specifications.
1 – Test based on 5433F laminates with 0.016”/0.020” facings.
2 – Impact Strength was tested and calculated per ASTM D5420 using a modified dart
and specimen test frame.
3 – Tensile Strength was tested and calculated per ASTM B557.
4 – Roller Peel Strength was tested and calculated per ASTM D3167.
5 – Water absorption was tested calculated per ASTM D570.

Health Precautions

This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.

Disclaimer

All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.

Gillfab® 5433F

Overview

Applications

Features

Availability

Construction

Specifications

Performance Properties, Typical

Health Precautions

Disclaimer

Join Our Team

Take your career to the next level and push the limits of possibility.

The Gill Corporation provides the products that solve your challenges.

Explore

Read

Collaborate

Resources

Connect