Gilliner ® 1366D is a high impact resistant and high wear resistant liner constructed from woven E-glass and S-glass cloth with nylon surface scrim and polyester resin system to optimize strength, weight, and cost. The combination of E- and S-glass reinforcement yields a higher strength-to-weight ratio as compared to E-glass only. This product also features a resin rich surface to prevent wear through over frame sections and attach points that are associated with repetitive bulk cargo loading.
货舱的货物衬里，飞机的舱壁饰面。
Designed for lower sidewalls where in-service conditions may result in wear through over frame sections, impact damage and/or fastener hole tear out at attach points. 1366D has been successfully used in Boeing 737 cargo bays.
| 表格形式 | 卷式 | |
|---|---|---|
| 厚度，英寸（毫米） | 0.045 (1.14) 0.060 (1.52) | 0.045 (1.14) – |
| 长度 | 典型 144 英寸（3,658 毫米） | 典型 150 英尺（45,720 毫米） |
| 宽度 | 典型 48 英寸（1,219 毫米） 最大 72 英寸（1,829 毫米） | 典型 48 英寸（1,219 毫米） 最大 60 英寸（1,524 毫米） |
| 颜色 | 自然的 | 自然的 |
树脂： 聚酯纤维
加强： 编织E-和S-玻璃纤维布
表面： Nylon surface scrim
| TGC 部件号 | 1366D045 | 1366D060 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.045 (1.14) | 0.060 (1.52) | |
| 重量，psf (kg/m2 ) | 0.42 (2.05) | 0.61 (2.98) | |
| 抗拉强度1, 西 (兆帕) | 经 | 77 (531) | 87 (600) |
| 充满 | 72 (496) | ||
| 抗磨性2 , g/1000 次循环 | 0.02 | 0.06 | |
| 冲击强度3 , 英尺-磅 (牛米) | 32 (43) | 41 (56) | |
| 边缘承载强度4, 西 (兆帕) | 经 | 47 (324) | 56 (386) |
| 充满 | 44 (303) | 46 (317) | |
| 抗弯强度5, 西 (兆帕) | 经 | 35 (241) | |
| 充满 | |||
| 弯曲正切模量5, 微星 (GPa) | 经 | 2.5 (17) | 2.5 (17) |
| 充满 | 2.9 (20) | ||
| 易燃 | 符合 FAR 25.853 和 855 附录 F 第 I 和 III 部分 | ||
所示表格反映了典型值，不应用作设计规范。
1拉伸强度根据 ASTM D638 进行测试和计算。
2耐磨性根据 ASTM D3389 使用 CS-10 砂轮、500 克重物进行测试，并对样品制备进行了微小修改。
3冲击强度是根据 ASTM D5420 使用改进的落镖和试样测试框架测试计算得出的。
4边缘承载强度是根据 ASTM D953 使用改进的张力加载夹具计算的。
5弯曲强度和模量根据 ASTM D790 进行测试和计算。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
