Gillfab® 5120 is an ultra-thin sandwich panel made from aluminum skins and an aluminum honeycomb core.
The panel is designed for flooring, cabinetry and instrument panels in business jet and general aviation aircraft. The panel is more rigid than plate aluminum of the same thickness but weighs 50% less.
| 厚度，英寸（毫米） | 0.091 (2.31), 0.125 (3.18) |
| 正面，正面/背面，英寸（毫米） | 0.020/0.011 (0.508/0.279) 0.020/0.020 (0.508/0.508) |
| 长度，英寸（毫米） | 典型 120 (3,048)，最大 144 (3,658) |
| 宽度，英寸（毫米） | 典型 48 (1,219)，最大 48 (1,219) |
粘合剂： 符合 Mil-A-25463 要求的环氧薄膜粘合剂
核： 5052N铝蜂窝
饰面： Aluminum skins (2024-T3 or 7075-T6) bare or clad
| TGC 部件号 | 5120 | |
|---|---|---|
| 面板重量，psf（kg/m2) | 0.72 (3.52) | |
| 面板厚度，英寸 (mm) | 0.126 (3.20) | |
| 正面/背面蒙皮厚度，英寸（毫米） | 0.020/0.020 (0.508/0.508) | |
| 平面压缩，psi (Mpa) | 1,012 (6.98) | |
| Climbing Drum Peel, in-lbs/3″ width (N-m/76mm width) | 脸 | 60 (6.78) |
| 后退 | 39 (4.41) | |
| 易燃 | 符合 FAR 25.853 和 855 App F 第 I 部分 (a)(1)(I) | |
所示数字反映了典型值，不应用作设计规范。
当遵循推荐的预防措施时，本产品可以安全使用和应用。使用本产品前，请阅读并理解 安全数据表 (SDS)，其中提供有关健康、身体和环境危害、处理预防措施和急救建议的信息。仅供工业使用。离孩子远点。其他信息可在以下位置找到： www.thegillcorp.com.如需销售和订购信息，请致电 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
