Gillfloor® 5424 是一種高強度地板面板，由單向玻璃纖維增強環氧樹脂飾面粘合到鋁蜂窩芯材製成。這種多功能地板適用於乘客和貨艙。
適用於客貨艙的多功能地板面板。 5424 I 型用於低流量區域，例如座椅下方。 II型用於人流量大的區域，例如走道和入口。 III 型與 II 型相似，但飾面較厚，用於交通繁忙和其他重型區域，例如過道、廚房或其他高負載區域。
| 第5424章 | 第5424章 | 第5424章 | |
|---|---|---|---|
| 厚度，英寸（毫米） | 0.400 (10) | ||
| 正面、正面/背面英吋（毫米） | 0.015/0.015 (0.381/0.381) | 0.018/0.018 (0.457/0.457) | 0.022/0.022 (0.559/0.559) |
| 長度和寬度，英吋（毫米） | 典型尺寸 48 x 144 (1,219 x 3,658) | ||
| 蜂窩 | 5052鋁低密度 | 5052中密度鋁 | 5052中密度鋁 |
粘合劑： 環氧樹脂
核： 5052合金鋁蜂窩
飾面加固： 單向玻璃纖維
飾面樹脂系統： 環氧樹脂
| TGC 產品編號 | 應用 | 替代吉爾產品 |
|---|---|---|
| Gillfloor® 5424 Type I | 低人流量區域，座椅下方 | Gillfloor® 4709 Ty III/ epoxy graphite facings bonded to low-density Gillcore®HD meta-aramid core Gillfloor® 4809 Ty VI/ epoxy graphite facings bonded to low-density Gillcore®HK para-aramid core Gillfloor® 4417 Ty I/ epoxy fiberglass facings bonded to low-density Gillcore®HD meta-aramid core Gillfloor® 4518 Ty X/ epoxy fiberglass facings bonded to low-density Gillcore®HK para-aramid core |
| Gillfloor® 5424 Ty II | 過道和入口 | Gillfloor® 4709 Ty II/ epoxy graphite facings bonded to medium-density Gillcore®HD meta-aramid core Gillfloor® 4809 Ty VII/ epoxy graphite facings bonded to medium-density Gillcore®HK para-aramid core Gillfloor® 4417 Ty II/ epoxy fiberglass facings w bonded to medium-density Gillcore®HD meta-aramid® core Gillfloor® 4518 Ty XI/ epoxy fiberglass facings bonded to low-density Gillcore®HK para-aramid core |
| Gillfloor® 5424 Ty III | 人流量大的區域、廚房 | Gillfloor® 4417 Ty III/ thicker epoxy fiberglass facings bonded to medium-density Gillcore® HD meta-aramid core |
以下測試依照 BMS 4-23 規範要求進行。
| TGC 部件號 | 第5424章 | 第5424章 | 第5424章 |
|---|---|---|---|
| 重量，psf (kg/m2) | 0.53 (2.59) | 0.62 (3.03) | 0.72 (3.51) |
| 長梁彎曲，磅 (N) | 303 (1,348) | 328 (1,460) | 445 (1,980) |
| 撓度 @ 100 磅，英寸（@ 445N，毫米） | 0.73 (19) | 0.70 (18) | 0.28 (7) |
| 面板剪切力，磅 (N) | 1,079 (4,800) | 1,228 (5,462) | 1,566 (6,966) |
| Drum Peel, in-lb/3″ width (N/76mm width) | 48 (214) | 48 (214) | 45 (200) |
| 核心壓縮力，psi (N/mm2) | 1,037 (7) | 1,625 (11) | 1,633 (11) |
| 衝擊強度，英寸-磅（牛米） | 111 (12.54) | 107 (12.09) | 126 (14.2) |
| 插入剪力，磅 (N)* | 1,491 (6,632) | 1,736 (7,722) | 1,540 (6,850) |
| 面內剪切力，磅/英寸（牛/毫米） | 426 (75) | 462 (81) | 507 (87) |
| 翹曲，英寸/英尺 | <0.025 (2.1) | <0.025 (2.1) | <0.025 (2.1) |
| 滾輪車，週期，磅/輪（N/輪） | 沒有憂鬱症： 80k, 158 (700) | 沒有憂鬱症： 120k, 250 (1,100) | 沒有憂鬱症： 120k, 250 (1,100) |
| 易燃 | 符合 FAR 25.853 和 855 附錄 F 第 I 部分 | ||
*5L5107 所示數字反映的是典型值，不應用作設計規格。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
