Gillfab® 5075 is a family of light weight and high performance sandwich panels made from woven fiberglass reinforced phenolic facing bonded to Gillcore® HD meta-aramid honeycomb. Gillfab® 5075 is the basic construction. Gillfab® 5075T offers options of 2 mil white polyvinyl fluoride film or 1.5mil granite gray polyvinyl fluoride film on the back side of the panel. Gillfab® 5075E offers the same options on both sides of the panel.
該面板設計用於飛機機艙內部結構，如廚房、衛生間、艙壁、隔板、儲物艙和機組人員休息區。
| 厚度，英寸（毫米） | 0.250 (6.35) 0.375 (9.53) 0.500 (12.7) 0.750 (19.05) 1.00 (25.40 |
| 正面，正面/背面，英寸（毫米） | 0.010/0.010 (0.254/0.254) 0.015/0.015 (0.381/0.381) 0.020/0.020 (0.508/0.508) |
| 長度，英寸（毫米） | 典型 60 (1,524)，最大 144 (3,658) |
| 寬度，英寸（毫米） | 典型 48 (1,219)，最多 72 (1,829) |
| 蜂窩 | Light-density Gillcore® HD Meta-aramid Honeycomb |
粘合劑： 熱熔膠
核： Gillcore® HD meta-aramid
飾面加固： 機織玻璃纖維布
飾面樹脂系統： 酚醛樹脂
以下測試按照 SAE 航空航天材料規範和 ASTM 標準方法進行。
| TGC 部件號 | 5075 | |
|---|---|---|
| 面板重量，psf (kg/m2) | 0.5 (2.3) | |
| 面板厚度，英寸 (mm) | 1.00 (25.40) | |
| Drum Peel1, in-lbs/3″ width (N-m/76mm width) | 25 (2.82) | |
| 加德納衝擊強度2, 英寸-磅 (Nm) | 15 (1.69) | |
| 平面壓縮1, 磅/平方英寸 (兆帕) | 284 (1.96) | |
| 面板剪切強度1, 磅 (N) | 絲帶 | 745 (3,314) |
| 橫 | 431 (1,917) | |
| 長梁彎曲1, 磅 (N) | 絲帶 | 392 (1,744) |
| 煙霧排放量，Ds | 了解 FAR 25 應用程序 F 第五部分 | |
| 熱釋放率 | 了解 FAR 25 應用程序 F 第 IV 部分 | |
| 易燃 | 符合 FAR 25.853 App F 第 I 部分 (a)(1)(i) | |
*基於 0.015/0.015 端面
1AMS 標準 401B
2ASTM D5420
所示數字反映了典型值，不應用作設計規範。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
