Gillfab ® 4122S 是一種輕質、低煙排放的夾芯板，由玻璃纖維增強酚醛面板粘合到間位芳綸蜂窩芯材製成。根據要求，可在一側或兩側添加 1 密耳白色聚氟乙烯薄膜覆蓋層。
這種多功能面板通常用於飛機內部應用，例如側壁、貨艙、艙壁、廚房、盥洗室和天花板。
| 厚度1, 英寸 (毫米) | 0.250 (6.35) 0.500 (12.70) 0.750 (19.05) 1.000 (25.40) |
| 長度，英寸（毫米） | 典型 144 (3,658) |
| 寬度，英寸（毫米） | 典型 48 (1,219) |
| 顏色 | 自然色或白色 |
1 可根據要求提供不同的面板厚度
粘合劑： 改性酚醛
核： Gillcore® HD honeycomb
飾面加固： 7781玻璃纖維布
飾面樹脂系統： 酚醛樹脂
可根據要求在一側或兩側添加 1 百萬白色聚氟乙烯薄膜覆蓋層。
以下值是 4122S 面板的典型值，不應用作設計值。
可根據要求提供 FAA 批准的 4122S250、4122S500 和 4122S750 機械性能 B 基礎許用值以及 FAA 表格 8110-3。
| TGC 部件號 | 4122S250 | 4122S500 | 4122S750 | 4122S1.0 | ||
|---|---|---|---|---|---|---|
| 物性 | ||||||
| 面板厚度，英寸 (mm) | 0.247 (6.2) | 0.497 (12.6) | 0.744 (18.9) | 1.000 (25.4) | ||
| 標稱飾面厚度 1 , 英寸 (毫米) | 0.020/0.020 (0.508/0.508) |
|||||
| 單位面積重量，PSF (kg/m2) | 0.48 (2.34) | 0.54 (2.64) | 0.60 (2.93) | 0.65 (3.17) | ||
| 機械性能 | ||||||
| 長梁彎曲2 | 極限載荷，lbf (N) | 絲帶 | 75 (334) | 200 (890) | 290 (1290) | 360 (1601) |
| 橫 | 80 (356) | 190 (845) | 275 (1223) | 340 (1512) | ||
| 面板極限強度，ksi (MPa) | 絲帶 | 30 (207) | ||||
| 橫 | 30 (207) | |||||
| 短梁剪3 | 極限載荷，lbf (N) | 絲帶 | 280 (1246) | 475 (2113) | 670 (2980) | 755 (3358) |
| 橫 | 145 (645) | 265 (1179) | 375 (1668) | 455 (2024) | ||
| 核心剪切極限強度，psi (MPa) | 絲帶 | 200 (1.38) | 160 (1.10) | 150 (1.03) | 125 (0.86) | |
| 橫 | 105 (0.72) | 90 (0.62) | 85 (0.59) | 77 (0.53) | ||
| 核心壓縮極限強度4, 磅/平方英寸 (兆帕) | 420 (2.90) | 355 (2.45) | 335 (2.31) | 335 (2.31) | ||
| 平面內剪切極限強度5, 磅力/英寸 (N/mm) | 不適用 | 不適用 | 455 (80) | 不適用 | ||
| 易燃性 | ||||||
| 易燃 | 符合 FAR 25.853 和 855 App。第一部分 | |||||
1 每個飾麵包括兩層 7781 玻璃纖維布。可根據要求提供不同的飾面厚度。
2 Long Beam Bending was tested and Facesheet Ultimate Strength was calculated per ASTM D7249. Specimens were tested with 4-point bending configuration (4” loading span and 22” support span).
3 Short Beam Shear was tested and Core Shear Ultimate Strength was calculated per ASTM C393. Specimens were tested with 3-point bending configuration (6” support span).
4 核心壓縮根據 ASTM C365 進行測試和計算。
5 平面內面板剪切試樣根據 ASTM D8067 進行測試。
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
