Gillfab® 4422 is a light weight and low smoke cargo liner panel made from woven fiberglass reinforced phenolic facings bonded to meta-aramid honeycomb core.
The panel is designed to use as cargo compartment lining in sidewalls, ceilings, partition walls, and as decompression panels in the lower cargo hold in all Airbus Industrie A300/A310/A300-600, A318, A319/A320/A321 and A330/A340 aircrafts.
4422-295 | 4422-307 | 4422-315 | 4422-331 | 4422-346 | 4422-366 | 4422-386 | 4422-413 | 4422-508 | 4422-547 | 4422-610 | 4422-630 | |
厚度,英寸(毫米) | 0.295 (7.5) | 0.307 (7.80) | 0.315 (8.00) | 0.331 (8.4) | 0.346 (8.8) | 0.366 (9.30) | 0.386 (9.80) | 0.413 (10.50) | 0.508 (12.90) | 0.547 (13.90) | 0.610 (15.50) | 0.630 (16.00) |
正面、正面/背面、英寸(毫米) | 0.013/0.013 (0.330/0.330) | 0.020/0.020 (0.508/0.508) | 0.020/0.020 (0.508/0.508) | 0.020/0.020 (0.508/0.508) | 0.020/0.020 (0.508/0.508) | 0.013/0.013 (0.330/0.330) | 0.020/0.020 (0.508/0.508) | 0.013/0.013 (0.330/0.330) | 0.013/0.013 (0.330/0.330) | 0.020/0.020 (0.508/0.508) | 0.013/0.013 (0.330/0.330) | 0.013/0.013 (0.330/0.330) |
長度和寬度,英寸 (mm) | 典型尺寸 48 x 144 (1,219 x 3,658) 最大 72 x 168 (1,829 x 4,267) |
粘合劑: 改性酚醛
核: 間位芳綸
飾面加固: 玻璃纖維布和/或單向
飾面樹脂系統: 酚醛樹脂
以下測試按照 Airbus 2550 M1M 000800 規範要求進行。
TGC 部件號 | 4422-295 | 4422-307 | 4422-315 | 4422-331 | 4422-346 | 4422-366 | 4422-386 | 4422-413 | 4422-508 | 4422-547 | 4422-610 | 4422-630 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
重量,每平方英尺(公斤/平方米) | 0.452 (2.207) | 0.577 (2.817) | 0.580 (2.832) | 0.549 (2.682) | 0.548 (2.677) | 0.478 (2.334) | 0.606 (2.96) | 0.495 (2.417) | 0.530 (2.58) | 0.717 (3.50) | 0.568 (2.773) | 0.575 (2.807) |
長梁彎曲,磅 (N) | 107 (476) | 202 (899) | 193 (860) | 260 (1,157) | 250 (1,113) | 135 (601) | 269 (1,197) | 173 (770) | 182 (810) | 337 (1,500) | 223 (992) | 235 (1,046) |
Drum Peel, Face/Back,in-lbs/3″ width (N/76mm width) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) | 48/48 (214/214) | 50/50 (223/223) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) | 23/23 (204/204) |
穩定核心壓縮,psi (N/cm2) | 601 (414) | 575 (396) | 592 (408) | 577 (398) | 537 (370) | 597 (411) | 596 (411) | 581 (401) | 594 (410) | 577 (398) | 577 (398) | 554 (382) |
衝擊強度,ft-lbf (Nm) | 17 (23) | 17 (23) | 17 (23) | 21.83 (29.5) | 17.34 (23.4) | 17 (23) | 17 (23) | 17 (23) | 17 (23) | 26 (35) | 17 (23) | 17 (23) |
翹曲度,英寸/英尺(毫米/米) | <0.036 (3.0) | |||||||||||
易燃 | 符合 FAR 25.853 和 855 附錄 F 第 I 和 III 部分的要求 |
所示數字反映了典型值,不應用作設計規範。
當遵循推薦的預防措施時,本產品可以安全使用和應用。使用本產品前,請閱讀並理解 安全數據表 (SDS),其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息: www.thegillcorp.com.如需銷售和訂購信息,請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.