Gillfab® 5433F is a hybrid laminate made from aluminum facings bonded to a woven and unidirectional fiberglass reinforced epoxy laminate.
該層壓板設計用作高人流量區域（例如貨艙門區域和散裝貨物區域）的貨艙地板面板。
| 厚度，英寸（毫米） | 0.058 (1.47) |
| 長度，英寸（毫米） | 典型 96 (2,438) 最多 144 (3,658) |
| 寬度，英寸（毫米） | 典型 48 (1,219) |
| 飾面（正面/背面），英寸（毫米） | 0.016/0.020 (0.406/0.508) 和 0.020/0.016 (0.508/0.406) |
加強： Epoxy woven and unidirectional fiberglass reinforced laminate
面向： 鋁合金2024-T3
| TGC 部件號 | 5433F1 | |
|---|---|---|
| 厚度，英寸（毫米） | 0.054 (1.37) | |
| 重量，psf (kg/m2) | 0.72 (3.51) | |
| 衝擊強度2, 英尺-磅 (Nm) | 31 (42.0) | |
| 抗拉強度3, 西 (兆帕) | 縱 | 86 (593) |
| 長橫 | 96 (662) | |
| Roller Peel Strength4, lbs/inch (N/25mm) | 面側 | 37 (165) |
| 吸水率5, % | 0 | |
| 易燃 | 符合 25.853 和 855 第 I 部分和第 III 部分的要求 | |
所示表格反映了典型值，不應用作設計規範。
1 – Test based on 5433F laminates with 0.016”/0.020” facings.
2 – Impact Strength was tested and calculated per ASTM D5420 using a modified dart
and specimen test frame.
3 – Tensile Strength was tested and calculated per ASTM B557.
4 – Roller Peel Strength was tested and calculated per ASTM D3167.
5 – Water absorption was tested calculated per ASTM D570.
當遵循推薦的預防措施時，本產品可以安全使用和應用。使用本產品前，請閱讀並理解 安全數據表 (SDS)，其中提供有關健康、身體和環境危害、處理預防措施和急救建議的信息。僅供工業使用。遠離兒童。可以在以下位置找到更多信息： www.thegillcorp.com.如需銷售和訂購信息，請致電 1-626-443-6094。
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
