Nous sommes l'un des plus grands fabricants mondiaux de panneaux en nid d'abeille.
Fournir des solutions innovantes pour les industries les plus cruciales du monde.
Une vaste collection de documents, ici à portée de main.
Voyez ce que nous pouvons faire pour vous.
Collaborer à travers les continents pour fournir des solutions composites innovantes.
Explorez des opportunités passionnantes pour faire une différence et développer votre carrière.
STRIKEGRID® CEAF is a phosphoric acid anodized (PAA) continuous expanded aluminum foil (CEAF) product that also includes a proprietary coating which combines to negate the effects of galvanic corrosion when used in conjunction with carbon prepreg materials. STRIKEGRID® can be bonded to aircraft structures either as an outer ply or embedded ‘one-ply down’ beneath a layer of surfacing film.
STRIKEGRID® CEAF is now available in continuous roll form for SG-3 (2 mil) in 24” wide rolls and SG-4 (4 mil) material in 36” wide rolls. Both SG-3 and SG-4 are 2,500 linear foot rolls (splices allowed per roll will be two or less, with a minimum 50 feet between splice locations).
Largeur du rouleau | Longueur (pied linéaire) | Superficie (pied carré) | Longueur (m) | Superficie (mètre carré) |
---|---|---|---|---|
24″ (610mm) | 250 à 1 250 | 500 à 2 500 | 76,2 à 381 | 46,5 à 232 |
36″ (915mm) | 167 à 833 | 500 à 2 500 | 51 à 254 | 46,5 à 232 |
Désignation du produit | SG-3 | SG-4 |
---|---|---|
Grade | 013 | 016 |
Alliage d'aluminium | 1145 | 1145 |
Largeur, pouces (mm) | 24″ (610) | 24″ to 36″ (610 to 915) |
Poids, psf (gsm) | 0.013 (63) | 0.016 (78) |
Épaisseur globale, pouces (mm) | 0.002 (0.050) | 0.004 (0.100) |
Boeing BMS 8-336, spécification de matériau pour Type 1, Classe 2, Grade 013, Forme B, Style F pour SG-3, matériau de 2 mils d'épaisseur et Type 1, Classe 2, Grade 016, Forme B, Style F pour SG- Matériau de 4, 4 mil d'épaisseur. Boeing BMS 8-336, Boeing D-800, Goodrich RMS-0523, HAFEI Aviation Q/2AJ640-2009, Mitsubishi (MHI) 5200MAS, MRAS STMB-M533, Spirit AeroSystems SMS-110101B.
STRIKEGRID® CEAF is currently used on Boeing B737, B777, B787, 747-8 and the MRJ (Mitsubishi Regional Jet) aircraft.
Ce produit peut être utilisé et appliqué en toute sécurité lorsque les précautions recommandées sont suivies. Avant d'utiliser ce produit, lisez et comprenez les Fiche de données de sécurité (FDS), qui fournit des informations sur les risques sanitaires, physiques et environnementaux, les précautions de manipulation et les recommandations de premiers secours. Pour usage industriel uniquement. Garder loin des enfants. Des informations supplémentaires peuvent être trouvées à: www.thegillcorp.com. Pour des informations sur les ventes et les commandes, appelez le 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
La société Gill
4056 Rue Facile
El Monte, Californie 91731-1087
Etats-Unis
P +1 (626) 443-6094
E info@thegillcorp.com