We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gillfab® 1050 is a general purpose laminate made from fiberglass cloth reinforced epoxy resin. Gillfab® 1050 is available with a peel ply on both sides for ensuring a bondable
surface. Gillfab® 1050 comes in sheet form.
The laminate is designed for general aircraft purposes.
Gillfab® 1050 (Sheet form) | |
Thickness, inch (mm) | 0.020 (0.51) Other thickness available upon request |
Length, inch (mm) | Standard 144 (3,658) Maximum 168 (4,267) |
Width, inch (mm) | Standard 48 (1,219) Maximum 60 (1,524) |
Resin: Epoxy
Reinforcement: Woven fiberglass cloth
The following tests are run in accordance with the ASTMs shown.
TGC Part Number | 1050 |
---|---|
Weight, psf (kg/m2) | 0.24 (1.2) |
Tensile Strength, ksi (MPa) Warp | 55 (380) |
Tensile Strength, ksi (MPa) Fill | 55 (380) |
Water Absorption, % | <1 |
60 Second Vertical Flammability | Pass |
Figures shown reflect typical values and should not be used as design specifications.
Tension testing per ASTM D-638, Type 1.
Water Absorption per ASTM D570, dried one hour at 225°F followed by a 24 hour water soak.
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com