We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gillfab® 1100 is a rigid laminate made from fiberglass cloth reinforced polyester. Gillfab® 1100 has a layer of white polyvinyl fluoride film overlay.
The laminate is designed for high impact resistant cargo compartment lining on DC-10 aircraft.
Gillfab® 1100 | ||
Sheet Form | Roll Form | |
Thickness, inch (mm) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) 0.060 (1.524) 0.070 (1.778) 0.090 (2.286) 0.120 (3.048) | 0.010 (0.254) 0.016 (0.406) 0.023 (0.584) 0.030 (0.762) 0.045 (1.143) |
Length | Standard 144 in (3,658 mm) Maximum 144 in (3,658 mm) | Standard 150 LF (46 m) Maximum 150 LF (46 m) |
Width, inch (mm) | Standard 48 (1,219) Maximum 60 (1,524) | Standard 48 (1,219) Maximum 60 (1,524) |
Resin: Fire resistant polyester
Reinforcement: Woven fiberglass cloth
Surface: Matte
Gillfab® 1100
TGC Product No. | Difference |
---|---|
Gillfab® 1167 | Fiberglass/phenolic cargo liner with excellent impact strength, low smoke density and toxicity. |
Gillfab® 1367A | Fiberglass/phenolic cargo liner with high impact strength, low smoke density and toxicity. |
The following tests are run in accordance with DMS 1946.
TGC Part Number | 1100-016 | 1100-090 | |
---|---|---|---|
Weight, psf (kg/m2) | 0.20 (0.98) | 0.91 (4.44) | |
Tensile Strength, ksi (mpa) | Warp Fill | 56 (386) 48 (331) | 55 (379) 50 (345) |
Tensile Modulus, msi (gpa) | Warp Fill | 3.6 (25) 2.9 (20) | 3.5 (24) 3.3 (23) |
Bolted Joint Strength, lbs (N) | Warp Fill | 235 (1,045) 213 (947) | 912 (4,057) 939 (4,177) |
Flexural Strength, ksi (mpa) | Warp Fill | N/A N/A | 80 (552) 63 (434) |
Flexural Modulus, msi (gpa) | Warp Fill | N/A N/A | 3.2 (22) 2.8 (19) |
Impact Strength, ft-lbs (N-m) | 6 (8.13) | 54 (73.21) | |
Shear Strength, psi (kpa) | 25,502 (175,830) | 45,186 (311,547) | |
Flammability | Meets FAR 25.853 & 855 App F Part I and III | Meets FAR 25.853 & 855 App F Part I and III |
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com