Gillfab® 1167/1167A

Overview

Gillfab® 1167 and 1167A are excellent impact resistant laminates made from fiberglass cloth reinforced phenolic resin. Gillfab® 1167 has a white polyvinyl fluoride film overlay on the face side and Gillfab® 1167A does not.

Applications

The laminate is designed for high impact resistant aircraft cargo compartment liner.

Features

High impact strength
High puncture resistance
High corrosion resistance
Low smoke density and toxicity
White polyvinyl fluoride film overlay on face side for surface reflectivity and resistanceto cleaning solutions
Service temperature: to 220°F (110°C)

Availability

	Gillfab® 1167	Gillfab® 1167A
Thickness, inch (mm)	0.016 (0.406) 0.025 (0.635) 0.030 (0.762) 0.040 (1.016) 0.045 (1.143) 0.060 (1.524) 0.090 (2.286)	0.016 (0.406) 0.025 (0.635) 0.045 (1.143) 0.090 (2.286)
Color	White on face side, amber on back side	Amber on both sides
Length, inch (mm)	Typical 144 (3,658), Maximum 144 (3,658)	Typical 144 (3,658), Maximum 144 (3,658)
Width, inch (mm)	Typical 48 (1,219), Maximum 60 (1,524)	Typical 48 (1,219), Maximum 60 (1,524)

Construction

Resin: Phenolic

Reinforcement: Woven fiberglass cloth

Surface: 1 mil white polyvinyl fluoride film overlay

Specifications

Gillfab® 1167

McDonnell Douglas – DMS 2226 Type 1, Class 1
FAR 25.855

Gillfab® 1167A

DMS 2226 Type I, CL2

Alternative Gill Products

TGC Product No.	Difference
Gillfab® 1100	High impact laminate made from fiberglass cloth reinforced polyester resin.
Gillfab® 1367A	Higher impact resistant than Gilfab®1100, made from fiberglass cloth reinforced phenolic resin.

Performance Properties, Typical

The following tests are run in accordance with DMS 2226.

TGC Part Number		Type 16	Type 25	Type 30	Type 45
Weight, psf (kg/m²)		0.15 (0.73)	0.24 (1.2)	0.29 (1.4)	0.43 (2.1)
Thickness, in (mm)		0.01 (0.4)	0.02 (0.61)	0.03 (0.7)	0.04 (1.1)
Water Absorption (%)		1.3	1.2	1.1	1
Impact, ft-lbs (N-m)		36 (49)	52 (71)	56 (76)	>60 (>81)
Bolt Joint Strength¹, lbs (N)		296 (1,317)	320 (1,423)	429 (1,908)	574 (2,553)
Bending Strength, ksi (mpa)	Warp	NR	48.71 (336)	64.55 (445)	54.4 (375)
Bending Modulus, msi (gpa)	Fill Warp Fill	NR NR NR	40.84 (282) 3.14 (22) 2.14 (15)	59.13 (408) 2.7 (18) 2.2 (15)	39 (269) 3.43 (24) 3.2 (22)
Tensile Strength, ksi (mpa)	Warp Fill	62 (428) 61 (420)	73 (502) 70 (479)	70 (482) 64 (439)	71 (490) 64 (444)
Tensile Modulus, msi (gpa)	Warp Fill	3 (21) 2.7 (19)	3.3 (23) 3 (21)	3.4 (24) 3.2 (22.1)	3.4 (24) 3.1 (21.4)
Flammability			Meets FAR 25.853 & 855 App F Part I and III

¹ Reported in warp direction.
NR = No Requirement

Figures shown reflect typical values and should not be used as design specifications.

Health Precautions

This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.

Disclaimer

All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.

Gillfab® 1167/1167A

Overview

Applications

Features

Availability

Construction

Specifications

Alternative Gill Products

Performance Properties, Typical

Health Precautions

Disclaimer

Join Our Team

Take your career to the next level and push the limits of possibility.

The Gill Corporation provides the products that solve your challenges.

Explore

Read

Collaborate

Resources

Connect