We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gillfab® 1367G is an ultra-light weight, high strength, low FST liner constructed fromwoven S-glass cloth with a modified phenolic resin system and a 1 mil white polyvinyl fluoride film overlay on the face side. Gillfab® 1367G is an alternative toother Gillfab® 1367 series for aircraft cargo liners which maximizes weight savings.
Cargo liners for cargo compartment, bulkhead facings and blowout panels for aircraft.
Thickness, inch (mm) | 0.007 (0.178) | 0.027 (0.686) |
Length, inch (mm) | Standard 144 (3,658) | Maximum 168 (4,267) |
Width, inch (mm) | Standard 48 (1,219) | Maximum 60 (1,524) |
Sides | Standard | |
---|---|---|
Color | Face side | 1 mil White PVF Film |
Back side | Amber |
Reinforcement: Woven fiberglass cloth
Resin System: Phenolic
Surface Finish: 1 mil white PVF film overlay
Specification Name | Previous Qualifications | Current Qualifications |
---|---|---|
Boeing BMS 8-223 | ||
Class 5 Grade B Types 7, 27 | 1367G | 1368G |
Refer to the PDS of the current qualifications for the most recent data sheet.
Gillfab® 1367 series are high strength, high impact and fire resistant fiberglass reinforced phenolic laminates for aircraft cargo liner
applications
TGC Product No. | Difference |
---|---|
Gillfab® 1367 | Slightly higher impact values than 1367A, and offering additional thickness. |
Gillfab® 1367A | Economical alternative to 1367 with standard weight and thickness requirements. |
Gillfab® 1367B | Thinner and lighter than 1367A. |
Gillfab® 1367C | 1367A in roll form. |
Gillfab® 1367E | 1367A with 1mil white PVF bonding on both faces of the laminate. |
Gillfab® 1367F | 1367A molded to a “Z” shape for wire spacing in cargo bay. |
Gillfab® 1367G | Extremely thin, lightweight and superior impact strength to corresponding types. |
Gillfab® 1367M | 1367B in roll form. |
Gillpatch® 1367P | Patch laminate intend for repairing facings of 1367A. |
The following tests are run in accordance with BMS 8-223 specification requirements.
TGC Part Number | 1367G007 | 1367G027 | |
---|---|---|---|
Thickness, inch (mm) | 0.007 (0.18) | 0.026 (0.69) | |
Weight, psf (kg/m2) | 0.067 (0.33) | 0.247 (1.20) | |
Impact Strength, ft-lbs (N-m) | 18 (24) | 39 (53) | |
Double Point Edge Bearing, lbs (N), max | Warp | 202 (898) | N/A |
Fill | 200 (890) | N/A | |
Flammability | Meet FAR 25.853 Appendix F Part I | ||
Polyvinyl Fluoride Film Peel Separation, inch | No PVF Film Peel Separation |
Figures shown reflect typical values and should not be used as design specifications.
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com