We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gillfab® 4522 is a low smoke sandwich floor panel made from woven fiberglass reinforced phenolic facings bonded to Gillcore® HD meta-aramid honeycomb core.
Flooring panels for containerize cargo holds in all Airbus Industrie 300 series aircrafts
Thickness, inch (mm) | 0.374 (9.5) |
Length and Width, inch (mm) | Maximum 60 x 144 (1,524 x 3,658) |
Facing thickness, face/back, inch (mm) | 0.020/0.015 (0.508/0.381) |
Adhesive: Epoxy
Core: Meta-aramid
Facings Reinforcement: Fiberglass woven cloth
Facings Resin System: Phenolic
TGC Part Number | 4522-374 |
---|---|
Weight, psf (kg/m2) | 0.609 (2.97) |
Long Beam Bending, lb (N) | 323 (1,439) |
Deflection @ 100 lbs, inch (@445N, mm) | 0.83 (21) |
Panel Shear, lbs (N) | 755 (3,449) |
Drum Peel, in-lbs/3″ width (N/76mm width) | 71 (317) |
Stabilize Compression, psi (N/mm2) | 1,690 (11.65) |
Impact Strength, ft-lbs (Nm) | 4.88 (6.61) |
Insert Shear, lbs (N) | 2,293 (10,200) |
Warpage, in/ft (mm/m) | 0 (0) |
Flammability | Meets requirements of FAR 25.853 & 855 Appendix FPart I and III |
Figures shown reflect typical values and should not be used as design specifications.
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com