We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Collaborating across continents to provide innovative composite solutions.
Gillfab® 4605 is a low smoke sandwich panel with thinner facings of phenolic resin reinforced with woven fiberglass and unidirectional carbon fiber bonded to a light-weight Gillcore® HD meta-aramid honeycomb core.
Flooring panel for use under seat areas of passenger compartment in AirbusA318/A319/A320/ A321/A330/A340 aircrafts.
Thickness, inch (mm) | 0.374 (9.5) |
Length, inch (mm) | Maximum 60 (1,524) |
Width, inch (mm) | Maximum 144 (3,658) |
Facing thickness, face/back, inch (mm) | 0.017/0.017 (0.4/0.4) |
Adhesive: Epoxy
Core: Meta-aramid
Facings Reinforcement: Unidirectional carbon fiber with woven glass cloth
Facings Resin System: Phenolic
TGC Product No. | Difference |
---|---|
Gillfab® 4505 | Low smoke sandwich floor panel with thicker facings, heavier density core. For use in high traffic areas. |
Gillfab® 4605 | Low smoke sandwich floor panel with thinner facings, lighter density core. For use under seating areas. |
The following tests are run in accordance with A1 5360 MIM000600 specification requirements.
TGC Part Number | 4605-374 |
---|---|
Weight, psf (kg/m2) | 0.605 (2.95) |
Warpage, in/ft (mm/m) | 0 (0) |
Long Beam Bending, lb (N) | 350 (1,556) |
Deflection @ 100 lbs, inch (@445N, mm) | 0.370 (9.42) |
Drum Peel, in-lb/3″ width (N/76mm width) | 78 (347) |
Flammability | Meet requirements of FAR 25.853 Appendix F Part I (a)(1)(i) & (a)(2)(ii) |
Figures shown reflect typical values and should not be used as design specifications.
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com