Gillfloor® 4017T

Overview

Gillfloor® 4017T is a light weight flooring panel made from unidirectional fiberglass reinforced epoxy facings bonded to meta-aramid honeycomb core.

Applications

Versatile flooring panels suitable for different areas in aircraft. Type I and VI are for cabin areas, such as aisles, entry ways or service doors. Type II is for light traffic areas, such as under seats and upper baggage bays. Type III, IV and V are for medium to high traffic areas, such as freighter aircraft, lower, forward and riser baggage bays.

Features

Fatigue resistant
Corrosion and moisture resistant
High impact strength
High strength-to-weight ratio
Low smoke generation
Service temperature range: to 180°F (80°C)

Availability

	4017T Ty I	4017T Ty II	4017T Ty III	4017T Ty IV	4017T Ty V	4017T Ty VI
Thickness, inch (mm)	0.280 (7.11) 0.400 (10.16) 0.405 (10.29) 0.530 (13.46) 0.630 (16.00)	0.218 (5.54) 0.280 (7.11) 0.330 (8.38) 0.400 (10.16) 0.410 (10.41) 0.530 (13.46) 0.535 (13.59) 0.655 (16.64) 0.780 (19.81)	0.400 (10.16) 0.535 (13.59)	0.400 (10.16) 0.585 (14.86)	0.295 (7.50)	0.400 (10.16)
Facing, face/back, inch (mm)	0.015/0.015 (0.381/0.381) 0.045/0.022 (1.143/0.559) 0.038/0.022 (0.965/0.559)	0.015/0.015 (0.381/0.381) 0.022/0.015 (0.559/0.381)	0.030/0.015 (0.762/0.381) 0.045/0.022 (1.143/0.559)	0.022/0.015 (0.559/0.381)	0.015/0.015 (0.381/0.381)	0.022/0.015 (0.559/0.381)
Length, inch (mm)	Typical 120 (3,048), Maximum 144 (3,658)
Width, inch (mm)	Typical 48 (1,219), Maximum 68 (1,727)
Honeycomb	Gillcore® HD high-density	Gillcore® HD medium-high density	Gillcore® HD high-density	Gillcore® HD low-medium density	Gillcore® HD medium-density	Gillcore® HD medium-density

Construction

Adhesive: Epoxy

Core: Meta-aramid

Facings Reinforcement: Unidirectional glass fiber

Facings Resin System: Epoxy

Specifications

McDonnell Douglas specification BZZ 7002 Types 1 thru 3
Embraer MEP 15-031
BAe MAT 003
FAR 25.853a – fire resistance

Performance Properties, Typical

The following tests are run in accordance with COMPS-028 & -022 specification requirements.

TGC Part Number	4017T Ty I	4017T Ty II	4017T Ty III	4017T Ty IV	4017T Ty V	4017T Ty VI
Panel Thickness, inch (mm)	0.400 (10.16)	0.400 (10.16)	0.535 (13.59)	0.535 (13.59)	0.295 (7.50)	0.400 (10.16)
Skin Thickness, inch (mm)	0.038/0.022 (0.965/0.559)	0.022/0.015 (0.559/0.381)	0.045/0.022 (1.143/0.559)	0.022/0.015 (0.559/0.381)	0.015/0.015 (0.381/0.381)	0.022/0.015 (0.559/0.381)
Weight, psf (kg/m²)	0.87 (4.25)	0.72 (3.52)	1.08 (5.27)	0.70 (3.42)	0.49 (2.39)	0.61 (2.98)
Long Beam Bending, lbs (N)	575 (2,558)	474 (2,108)	762 (3,390)	368 (1,637)	191 (850)	270 (1,201)
Deflection @ 100 lbs, inch (@ 445N, mm)	0.47 (11.94)	0.59 (14.99)	0.19 (4.83)	0.30 (7.62)	1.44 (36.58)	0.66 (16.76)
Drum Peel, in-lbs/3″ width (N/76mm width)	60 (267)	62 (276)	52 (231)	53 (236)	52 (231)	56 (249)
Flammability	Meets FAR 25.853 Part I and III

Figures shown reflect typical values and should not be used as design specifications.

Health Precautions

This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.

Disclaimer

All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.

Gillfloor® 4017T

Overview

Applications

Features

Availability

Construction

Specifications

Performance Properties, Typical

Health Precautions

Disclaimer

Join Our Team

Take your career to the next level and push the limits of possibility.

The Gill Corporation provides the products that solve your challenges.

Explore

Read

Collaborate

Resources

Connect